LCD TV COMBO TFTV1920D USER'S MANUAL
Table Of Contents Important Safety Instructions -------------------------------------------------------- 1 Characteristic Features ---------------------------------------------------------------- 3 Disc Information --------------------------------------------------------------------------- 4 Front and Right Side Panel ---------------------------------------------------------- 5 Left Side Panel ----------------------------------------------------------------------------- 7 Remote Control --------------
Important Safety Instructions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “Dangerous Voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important Safety Instructions Note: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Read these instructions. IMPORTANT FOR LASER PRODUCTS Keep these instructions. 1. CLASS 1 LASER PRODUCT Heed all warnings. 2. DANGER: Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. Follow all instructions. 3. CAUTION: Do not open the top cover. There are no user Do not use this apparatus serviceable parts inside the unit. Leave all servicing to near water.
Characteristic Features This product incorporates DVD player, LCD display and TV receiver in one system. Multiple Mode Auto TV Searching Function Can be connected to the TV antenna, supports TV mode Auto and manual TV programs searching CVBS mode function. S-VIDEO mode COMPOSITE mode NICAM Function VGA mode Supports the NICAM function.
Disc Information Discs Formats Supported By This Player DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) DVD Audio+Video (active picture) 12cm 242min(SS-DL) 266min(DS-SL) 484min(DS-DL) CD JPEG Audio 12cm Still high resolution 74min 12cm The operating method of some DVD discs is specified by the software maker. Please refer to the instruction manual of the disc. About Disc Terms Title Generally, pictures or music compressed on a DVD are divided into several sections, “title”.
Front Panel 1 16 1. 2. 3. 4. 5. 6. 7. 16 15 14 19" colour TFT screen 19" colour TFT screen clearly show the data. SOURCE button Press to select mode among TV, CVBS, S-VIDEO, COMPONENT, VGA and DVD. In setup menu, the same function as ENTER button. MENU button Press to enter or return to the previous setup menu. CH / button In the TV mode, press to select channels. In setup menu, the same function as / direction buttons. VOL / button In the TV mode, press to decrease or increase the volume.
Front and Right Side Panel 1 16 8. 9. 10. 11. 12. 13. 14. 15. 16. 16 15 14 Eject button Press to eject the disc out in DVD mode. Power button Press to enter or exit the standby mode. SD/MS/MMC Card Port Insert the SD, MS or MMC card into the port. Disc Tray Slot Used to load disc. Earphone Jack When connected to earphone, the internal speakers will automatically turn off. USB Connecting Port Connecting to the USB device. Remote Sensor Remote sensor window for the remote control.
Left Side Panel 1. 2. 3. 4. Y/Pb/Pr Input Jack Connected to the Y/Pb/Pr input in COMPONENT mode. Y/Pb/Pr L/R Audio Input Jack Connected to the L/R audio input in COMPONENT mode. Composite Audio/Video Output Jack In the CVBS mode, connected to output the Audio/Video signals. S-VIDEO and CVBS Audio/Video Input Jack Connected to the S-VIDEO input in S-VIDEO mode or CVBS input in the CVBS mode. The L/R audio input jacks can be used in the both S-VIDEO and CVBS modes. 5. 6. 7. 8.
Remote Control Preparation of Remote Control Using of Remote control Softly push the back cover to open the battery compartment. Point the remote control unit from no more than about 7m from the remote control sensor and within about 60 degrees of the front of the unit. Insert two batteries 1.5V, size AAA), please make sure the polarity matches the marks inside the compartment. 7M Softly press the back cover to close it. The operating distance may vary depending to the brightness around.
Remote Control Remote Control Drawing 1 2 22 3 23 4 24 5 25 6 26 7 8 27 9 28 10 29 11 30 12 13 14 31 15 32 16 33 17 34 18 35 19 36 20 37 21 38 1. POWER button Press to turn on or off this unit. 2. TV button Press to shift to TV mode. 3. DVD button Press to shift to DVD mode. 4. P.M. button Press to shift the screen picture modes among User, Standard, Soft, Bright and Shine. 5. S.M. button Press to shift the sound modes among User, Standard, Music, Movie and Speech. 6.
Remote Control 19. MENU button (under DVD mode) Press to enter disc menu when in DVD mode. Under teletext mode, press to disable teletext display and press again to resume. 20. SETUP button Press to open DVD setup menu when in DVD mode. Under teletext mode, press to display the index page. 21. SLOW button Press to activate slow playback under when in DVD mode.
System Connections Before connections, disassemble the jack cover first. Do not connect the power cord until all other connections have been made. Ensure that you observe the colour cord when connecting audio and video cables. Connecting to Power Supply Power is supplied through the provided appropriate power adapter, one end is connected to the DC 12V IN jack on the side panel of the unit, the other end to the wall AC outlet.
System Connections Connecting External AV Signal Source (YPbPr) Use the audio and video cables to connect the Y/Pb/Pr input Jacks on the side panel of the unit to the external AV signal source. After connection, turn on the power of the unit and external AV signal source and then press the SOURCE button to shift to COMPONENT mode. Connecting to External AV Input Device (AV Output) Use the audio and video cable to connect the AV output jacks on the side panel of the unit to the external AV input device.
System Connections Connecting to PC The unit can be connected to PC (person computer) via the VGA cable. Follow the steps and the figure below to connect. 1. Connect one end of the VGA cable to the VGA input jack on the side panel and the other end to the PC. 2. Connect one end of the audio cables to the PC audio input jack on the side panel and the other end to the PC audio output jack. 3. Set the PC's resolution at 1024x768@60Hz.
System Connections Connecting to TV Antenna This unit can be connected to the TV signal input source via the TV jack on the side panel. After connection, turn on the power of the unit. Then press the SOURCE button to shift to TV mode. After connecting to the antenna, turn on the unit, and go on with program searching, you can follow the below steps to select channels: 1. For 0~9 channel: Press the number buttons to select the channel X, wait several seconds and it will go to the selected channel.
TV Function NOTE: In other mode, you can refer to the following instructions in TV mode to go on with some settings. Only when there are signals, the menus can appear and be set. Preparation 1. 2. After connection, press the POWER button to turn on the power. (If it is turned on, the power indicator is blue.) Press the SOURCE button to shift to TV mode. You can go on with the following operations. Image Setting Note: This item is only available when there is signal input.
TV Function Brightness Setup Press the button to select Brightness and press the button to adjust the value . Press the MENU button to return to the previous menu. Image Scheme Audio Picture Setup Brightness 50 Contrast Hue Color Sharpness Advanced Contrast Setup Press the button to select Contrast and press the MENU button to return to the previous menu. button to adjust the value. Press the Hue Setup Press the button to select Hue and press the button to adjust the value.
TV Function When the VGA signal is connected to the unit, the Advanced setup menu is shown below: Image Press the " " button to select the desired item and press the "ENTER" button to enter it's setup menu. Press the "MENU" button to return to the previous menu. Advanced Audio Auto Adjust Setup Image Pos Phase Clock Auto Color SRGB Auto Adjust: If the monitor is not clear, you should carry out "Auto Adjust". Press the " " button to select "Auto Adjust" and press the "ENTER" button to enter it's menu.
TV Function Audio Setting Press the MENU button once to enter the setup menu. Press the button to select Audio and press the ENTER button to enter the menu shown on the right. In the Audio setup menu, press the button to select the desired item. Press the MENU button to return to the previous menu. Volume Setup Press the button to select Volume and press the MENU button to return to the previous menu. Bass Setup Press the button to select Bass and press the button to return to the previous menu.
TV Function Setup Setting Press the MENU button once to enter the setup menu. Press the button to select Setup and press the ENTER button to enter the menu shown on the right. In the Setup menu, press the button to select the desired item. Press the MENU button to return to the previous menu. Tuner/Channel Press the button to select the Tuner/Channel and press the ENTER button to enter the menu shown on the right. Press the button to select the desired item.
TV Function Auto Scan Press the button to select the Auto Scan and press the ENTER button to start auto scan. The screen will display shown below: Auto scan CH No 8 FREQ 154.20 MHz Auto scan will take a few minutes, when the tuning operation completes the unit will exit and memorise the programs by sequence automatically.
TV Function Manual Install Press the button to select the Manual Install and press the ENTER button to enter the menu shown on the right. In the Manual Install setup menu, press the button to select the desired item. Press the MENU button to return to the previous menu. PAL Tuner/Channel Image Audio Manual Install Setup Search 47.00 MHz Color System Fine Tune CH NO Store Search Press the button to select Search and press the or to start searching forward or backward.
TV Function Language Press the button to select the Language, press the ENTER button to enter the setup, press the button to select item. Press the MENU button to return to the previous menu. Image Language Audio English Setup French Spanish German Italian Factory Reset Press the button to select the Factory Reset and press the ENTER button to enter. Press the button to select "Yes" or "No", and press the ENTER button to reset to the default status or to cancel.
NICAM Function The unit support NICAM function under TV mode. Under NICAM TV broadcast: 1. When receiving stereo audio signals, press the STEREO/AUDIO button on the remote control repeatedly to shift the sound tracks between Nicam Stereo and Mono and the screen will appear corresponding display as shown below: Mono Nicam Stereo 2.
DVD Playback Operation Preparation: After connections, turn on the unit and select the relevant video input before playback. Disc Loading Steps: 1. 2. 3. 4. Press the POWER button to turn on the power. Press the SOURCE button and select DVD, press the ENTER button to confirm and shift to DVD mode. Handing the disc with its printed side outward vertically to the disc tray. (Referring to the below picture.) Slightly put the disc into the disc tray.
DVD Playback Operation Pause Press the PAUSE button once to pause the playback; press it repeatedly to start step-by-step playback. Press the PLAY button to resume normal playback. Previous and Next Press the button to go to the next chapter. Press the button once to return to the beginning of the current chapter or track; press it twice to go to the previous chapter. Fast Playback Press the or FWD/REV SCAN button on the remote control to activate fast backward or forward playback.
DVD Playback Operation GOTO During DVD disc playback, press the GOTO button on the remote control once, there will be a menu displayed on the screen. You can set or select items for your preference. Use the direction buttons to select items and press the ENTER button to enter and use the direction buttons to select the desired item. Press the direction button to return. When select the Title/Chapter, TT Time/CH Time, use number buttons to input desired title/chapter number time.
DVD Playback Operation Repeat Use the REPEAT button repeatedly to repeat Track, All or to cancel repeat. Some discs do not support the repeat function. Audio During CD playback, press the AUDIO button on the remote control to select the audio output mode: Mono Left, Mono Right, Mix-Mono and Stereo. GOTO Press the GOTO button to access the time-selected state. You can select Disc Go To, Track Go To or Select Track respectively by pressing this button repeatedly.
DVD Playback Operation Previous and Next During playback, press the or button to select picture. Menu Press the MENU button once to stop playback and return to the root menu. GOTO During playback, press the GOTO button on the remote control once, use the number buttons to input the file number. Picture Rotation This can be used only when the picture is normally displayed. Once another picture is selected, rotation will be cancelled automatically. Use the buttons to rotate the picture.
USB and SD/MS/MMC Card Function USB and SD/MS/MMC Card Function Preparation: 1. Connect the unit to the power supply. 2. Press the POWER to turn on the unit. 3. Press the SOURCE button to shift to DVD mode. 4. Insert the USB into the unit’s USB slot, or insert the SD/MS/MMC card into the SD/MS/MMC card slot on the right side of the unit. Please see the below figure: Make sure that files are stored in the USB and the SD/MS/MMC card before the connection. 5.
DVD System Setup Preparations 1. 2. 3. 4. 5. Connect to the power supply and turn on the unit. Press the SOURCE button to shift to DVD mode. Press the SETUP button on the remote control to display the settings menu. Press the direction buttons on the remote control to select a category. All the items in the category will appear on the screen. Press the SETUP button again to exit the setup. General Setup Page Press the DVD SETUP button to enter the General setup menu.
DVD System Setup OSD Lang - - General Setup Page - - The item is used to select the OSD language. TV Display Angle Mark OSD Lang Captions Screen Saver Last Memory Media Center 1. PS On Eng Off On On English French Spanish German Italian Portuguese Dutch 2. 3. 4. Press the direction buttons to select OSD Lang. Press the ENTER button to enter the setup. Use the direction buttons to select items. Press the ENTER button again to confirm selection and return. Set OSD Language Captions 1.
DVD System Setup Media Center - - General Setup Page - TV Display Angle Mark OSD Lang Captions Screen Saver Last Memory Media Center PS On Eng Off On On DVD USB SD/MMC MS 1. Press the direction buttons to select Media Center. 2. Press the ENTER button to enter the setup. 3. Use the direction buttons to select DVD, USB, SD/MMC or MS. 4. Press the ENTER button again to confirm selection and return.
DVD System Setup Dynamic 1. - - Dolby Digital Setup - Dual Mono Dynamic FULL Str 2. 3/4 1/2 1/4 3. 4. 5. OFF Set Drc To Full 6. Press the direction buttons to select Dynamic. Press the ENTER button to enter the setup, the screen will display as left: Press the OK button to enter. Use the direction buttons to adjust. Press the ENTER button again to confirm setting and return. Press the button to return. HDCD Setup In the Audio Setup Page, use the direction buttons to select HDCD Setup.
DVD System Setup Sharpness - - Video Quality Setup - Sharpness Brightness Contrast Low 00 00 1. High Medium Low 2. 3. 4. Press the direction buttons to select Sharpness. Press the ENTER button to enter the setup. Use the direction buttons to select High, Medium or Low. Press the ENTER button again to confirm selection and return. Sharpness Brightness 1. 2. Brightness 0 3. 4. Press the direction buttons to select Brightness.
DVD System Setup Audio - - Preference Page - Audio Subtitle Disc Menu Default Eng Off Eng 1. English French Spanish Chinese Japanese Italian Russian German 2. 3. 4. Preference Audio Language Press the direction buttons to select Audio. Press the ENTER button to enter the setup, see the left figure: Press the direction buttons to select audio language. Press the ENTER button again to confirm setting and return. Subtitle 1.
Troubleshooting SYMPTOM The player cannot play. There is no sound. CHECK ITEM Make sure disc tray is closed Make sure disc is loaded in. Make sure disc is loaded correctly. Make sure disc is not dirty or warped. Make sure the player’s region code is the same as region code of DVD disc. Make sure water condensation has not occurred. Take out disc and leave the player on for at least one hour when water condensation occurs. Make sure system connection is correct.
Specifications TFT-LCD Resolution 1440 x 900 TFT-LCD Screen Size 19 inches AC100~240V, 50/60Hz Power DC 12V 5A Power Consumption < 60W Dimension 494mm x 184mm x 412mm (LxWxD) Weight About 9.2 Kg Ambient Temperature 10~450C DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. © 1992 -1997 Dolby Laboratories, Inc.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.