LCD TV COMBO TFTV2030D USER'S MANUAL
Table Of Contents Important Safety Instructions -------------------------------------------------------- 1 Characteristic Features -------------------------------------------------------- 3 Disc Information --------------------------------------------------------------------------- 4 Front View ---------------------------------------------------------------------------------- 5 Rear View ----------------------------------------------------------------------------------- 7 Remote Control---------------------
Important Safety Instructions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “Dangerous Voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important Safety Instructions Note: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Read these instructions. IMPORTANT FOR LASER PRODUCTS Keep these instructions. 1. CLASS 1 LASER PRODUCT Heed all warnings. 2. DANGER: Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. Follow all instructions. 3. CAUTION: Do not open the top cover. There are no user Do not use this apparatus serviceable parts inside the unit. Leave all servicing to near water.
Characteristic Features This product incorporates a DVD player, LCD display and TV receiver in one system. Multiple Modes DVD mode TV mode AV1 mode AV2 mode S-VIDEO mode COMPONENT mode VGA mode Multi-audio end Multi-video modes Support multi-audio and multi-video modes, provide more selecting. High Quality Property Compatibility DVD, DVD+/-R, CD, CD-R, CD-RW, JPEG and DivX disc compatible. High Resolution Adopt an MPEG2 decoding format to achieve horizontal resolution more than 500 lines.
Disc Information Discs Formats Supported By This Player DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) DVD Audio+Video (active picture) 12cm 242min(SS-DL) 266min(DS-SL) 484min(DS-DL) CD JPEG Audio 12cm Still high resolution DivX 74min 12cm 12cm The operating method of some DVD discs is specified by the software maker. Please refer to the instruction manual of the disc.
Front Panel Front View 1. 2. 3. 4. 5. 6. 7. CARD button Press to enter SD or MS card mode in the DVD mode. Previous Skip button Press once to skip to the beginning of the current chapter/track. Press twice repeatedly to skip to the previous chapter/track for some discs under DVD mode. Next Skip button Press to skip to the next chapter/track for some discs under DVD mode. PLAY button Press to play the disc under DVD mode.
Front Panel 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Disc Tray Slot Used to load disc. SOURCE/ENTER button Press to select the modes: DVD, TV, AV1, AV2, S-VIDEO, Component, VGA. Press to confirm selection or exit the setup menu in the setup menu. MENU button Press to enter or exit setup menu. CH / button In TV mode, press to select channels. In setup menu, press to select desired items. VOL / button Press to decrease or increase the volume; In setup menu, press to adjust or set items.
Rear Panel Rear View 1. 2. 3. 4. 5. 6. VGA Input Jack Connected to the VGA output jack on a personal computer. Antenna Input Jack Connected to external antenna to receive the TV program in TV mode. Video Input Jack In AV1 mode, connecting for the external video signal input. L/R Audio Input Jack Connected to the L/R audio signal input in AV1 mode. L/R Audio Input Jack In AV2 or S-VIDEO mode, connecting for L/R audio signal input.
Remote Control Remote Control Drawing 1 22 2 3 23 4 24 5 25 6 26 27 7 28 + 29 8 9 - 30 VOL CH 31 10 11 12 13 32 14 33 15 34 16 35 17 18 36 X 37 19 38 20 39 21 40 1. POWER button Press to enter or exit the standby mode. 2. TV button Press to enter TV mode. 3. DVD button Press to enter DVD mode. 4. P.M. button Press to select picture mode. 5. S.M. button Press to select audio mode. 6. 0-9 Number buttons Press to select numbers. 7.
Remote Control 19. MENU button (in DVD) Press to access the disc menu in DVD mode. Under teletext mode, press to enter or exit mixed mode. 20. SETUP button Press to enter DVD setup menu. Under Teletext mode, press to display the index page. 21. SLOW button Press to activate slow playback under DVD mode. Under Teletext mode, press once to display the concealed information, such as solution of riddles or puzzles; press again to resume the riddles information from the display. 22.
Remote Control 40. GOTO button Press to access or exit from the search menu under DVD mode. Under teletext mode, press to display real clock, press the EXIT button to exit. Using of Remote control Point the remote control unit from no more than about 7m from the remote control sensor and within about 60 degrees of the front of the unit. Preparation of Remote Control Softly push the back cover to open the battery compartment. 7M Insert two batteries 1.
System Connections Do not connect the power cord until all other connections have been made. Ensure that you observe the colour cord when connecting audio and video cables. Connecting To External AV Signal Source (AV1) Use the audio and video cable to connect the input jacks on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and the external AV signal source press the SOURCE button to shift to AV1 mode.
System Connections Connecting to External AV Signal Source (AV2 and S-VIDEO) Use the audio and video cable to connect the AV2 input jacks on the rear panel of the unit to the external AV signal source. Use the S-VIDEO cable to connect the S-VIDEO input jack on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and the external AV signal source, press the SOURCE button to shift to AV2 or S-VIDEO mode.
System Connections Connecting to External AV Signal Source (Component) Use the audio and video cables to connect the Y/Pb(Cb)/Pr(Cr) input Jacks on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and external AV signal source, press the SOURCE button to shift to component mode.
System Connections Connecting to PC The unit can be connected to PC (person computer) via the VGA cable. Follow the figure below to connect: 1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit. 2. Connect the other end to the PC. 3. Connect one end of the audio cable to the PC audio input jack on the rear panel of the unit. 4. Connect the other end to the PC audio output jack. 5. You had better set the PC's resolution at: 800 x 600@60Hz.
System Connections Connecting to TV-Signal Input This unit can be connected to the TV signal input source via the 75 antenna jack on the rear panel. After connection, turn on the power of the unit, press the SOURCE button to shift to TV mode. TV SIGNAL INPUT Connecting to Power Adapter Power is supplied through the provided appropriative power adapter, one end is connected to the DC 12V IN jack on the rear panel of the unit, the other end to the AC100~240V wall outlet.
System Connections Connecting to Earphones This unit can be connected to an earphone for listening music privately. See the below figure for details: After connecting to the earphone, the internal speakers output will turn off automatically.
System Setup and Operation Preparations 1. After connection, press the POWER button to turn on the power. (If it is turned on, the power indicator is blue.) 2. Press the SOURCE button to shift mode. You can go on with the following operations: Image Setting Press the MENU button once to enter the setup menu, as shown on the right: In the setup menu, press the button to select the item, then press the ENTER button to enter the item, press the buttons to select.
System Setup and Operation Sharpness Setup Press the button to select Sharpness, Press the MENU button to return to the previous menu. button to adjust the value, press the Advanced Setup Press the button to select Advanced, press the ENTER button to confirm and enter the item. In the menu, press the button to select the desired item, press the ENTER button to confirm, press the MENU button to return to the previous menu. Note: This item is only available when there is VGA signal input.
System Setup and Operation Listen Mode Setup Press the button to select Listen Mode, press the ENTER button to enter, press the button to select items, press the ENTER button to confirm. Press the MENU button to return to the previous menu. Sound Mode Setup Press the button to select Sound Mode, press the ENTER button to enter, press the button to select item, press the ENTER button to confirm. Press the MENU button to return to the previous menu.
System Setup and Operation Tuner/Channel Press the button to select the Tuner/Channel press the ENTER button to enter the menu as shown on the right. Press the button to select the desired items, press the ENTER button to enter the item. Press the MENU button to return to the previous menu, press the EXIT button to exit the setup menu. Note: this setup only available in TV mode.
System Setup and Operation Channel Name Press the button to select the Channel Name, press the ENTER button to enter the setup, and then press the button to select the input position, press the button to select character or press the number button to input number, press the ENTER button to confirm input. Press the MENU or EXIT button to exit. Skip Press the button to select the Skip, press the ENTER button to enter the set the item on or off. Press the MENU button to return to the previous menu.
System Setup and Operation Fine Tune Press the button to select the Fine Tune, press the or button to start fine tuning forward or backward. Press the MENU button to return to the previous menu. Store Press the button to select the Store, press the ENTER button to store the fine tuning effect. Back Press the button to select the Back, press the ENTER button to cancel the fine tuning effect.
DVD Playback Operation Preparation: After connections have been made, turn on the TV and select the relevant video input before playback. Disc Loading Steps: 1. 2. 3. 4. Press the power button on the front panel to turn on the power, the player will search a disc and play it automatically in DVD mode. Handing the disc with its printed side outward vertically to the disc tray. (Referring to the below picture.) Slightly put the disc into the disc tray.
CD Playback Operation Repeat Use the REPEAT button to repeat a chapter, a title or all, and also to cancel repeat. GOTO During DVD disc playback, press the GOTO button on the remote control once, there will be a menu displayed on the screen. You can set or select items for your preference. Use the direction buttons to select items, press the ENTER button to enter and use the direction buttons to select the desired item. Press the direction button to return.
DVD Playback Operations Stop Press this button once to stop playback and then press PLAY button to resume it. Press the button twice to stop playback completely. Fast Playback Press the fast FWD/REV SCAN button on the remote control to activate fast forward or rewind playback. Repeat During playback, press the REPEAT button repeatedly to repeat a Track, All or cancel the repeat. GOTO Press the GOTO button to access the time-selected state.
DVD Playback Operations Repeat Press the REPEAT button to repeat a file, folder in sequence. Press it repeatedly to display as follows: Shuffle Random Single Repeat One Repeat All Repeat Off Menu Press the MENU button during playback to return to root folder. Press the PLAY button to resume normal playback. GOTO Press the GOTO button to select desired disc starting track or track starting time.
DVD Playback Operations Repeat During playback, press it repeatedly, and the repeat modes are Folder, Shuffle, Random, Single, Repeat One and Repeat All. Previous and Next During playback, press the next or previous page. or button to select picture. In the menu mode, press to turn to the GOTO During playback, press the GOTO button on the remote control once, use the number buttons to input the file number. Picture Rotation This can be used only when the picture is normally displayed.
DVD Setup Menu DVD Setup Menu General Setup Page This is the place where you arrange all important settings for the cooperation of the DVD with the TV set and other audio equipment. The General Setup is shown as follows: 1. 2. 3. Remove the disc from the DVD drive and press the 'SETUP' button on the remote control, the settings menu will appear. It includes General Setup, Speaker Setup, Dolby Digital Setup, Video Setup, and Preference.
DVD Setup Menu Captions You can choose captions on or off on screen during playback. Dual Mono This function is used to set audio output: Stereo, L-Mono, R-Mono and Mix-Mono. Screen Saver When you enable this function a moving DVD symbol appears on the screen when the unit is stopped or showing a still picture for a moment. This feature saves screen from getting damaged by constant picture. Choose "Off" to disable the feature.
DVD Setup Menu Preference Page - - Preference Page - Audio Subtitle Disc Menu Parental Password Default Eng Off Eng English French Spanish Chinese Japanese Korean Russian Thai Preferred Audio Language Audio Please select your preferred language to playback DVD movies in general. Sure this selection is subject to the audio material on the particular disc. disc altogether. To set the parental level on the sub-menu press (direction buttons) on the remote control and press the ENTER button.
Attaching the Speaker Follow the below steps to attach the speaker: 1. Take out the unit, speaker and the fixing implements. 2. Insert the plastic tabs of the speaker into the holes on below rear panel of the unit, and slide it leftward, see the below figure 3. . Fix the speaker with fixing implements, see the below figure 31 .
Troubleshooting SYMPTOM The player cannot play. There is no sound. CHECK ITEM Make sure disc is loaded in. Make sure disc is loaded correctly. Make sure disc is not dirty or warped. Make sure the player’s region code is the same as region code of DVD disc. Make sure water condensation has not occurred. If it occurs, take out disc and leave the player on for at least one hour. Make sure system connection is correct. Make sure the power of speakers is turned on.
Specifications TFT-LCD Resolution 800 x 600 TFT-LCD Screen Size 20.1 inches AC100～240V，50/60Hz Power DC 12V 5A Power Consumption < 60W Dimension without speakers 494mm x 428mm x 220mm（LXWXD) Dimension with speakers 494mm x 485mm x 220mm（LXWXD) Weight About 12 Kg DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.
