LCD TV/DVD COMBO TFTV2035BK USER'S MANUAL
Table Of Contents Important Safety Instructions -------------------------------------------------------- 2 Disc Information --------------------------------------------------------------------------- 4 Front Panel --------------------------------------------------------------------------------- 5 Rear Panel ----------------------------------------------------------------------------------- 6 Remote Control --------------------------------------------------------------------------- 7 System Connections
Important Safety Instructions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “Dangerous Voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important Safety Instructions NOTES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Read these instructions. IMPORTANT FOR LASER PRODUCTS Keep these instructions. 1. CLASS 1 LASER PRODUCT Heed all warnings. 2. DANGER: Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. Follow all instructions. 3. CAUTION: Do not open the top cover. There are no user Do not use this apparatus serviceable parts inside the unit. Leave all servicing to near water.
Disc Information Discs Supported DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) DVD Audio+Video (active picture) 12cm 242min(SS-DL) 266min(DS-SL) 484min(DS-DL) CD JPEG Audio 12cm Still high resolution DIVX 74min 12cm 12cm Operating systems and features of individual DVD discs is specified by the software maker. Please refer to the instructions accompanying the disc. Disc Terms Titles A DVD disc is often divided into TITLES. A title can be a separate item or a segment of a film.
View of Unit Front and Right Side Panel 8 2 1. Colour TFT screen 2. Speakers 3. Power Indicator During work, it is blue; in standby mode, it is red. 4. Remote Sensor 5. SOURCE button Press repeatedly to select TV, COMPOSITE, S-VIDEO, COMPONENT, VGA or DVD mode. 6. MENU button Press to enter or exit system setup menu. 7. CH button Press to select channels in TV mode. On system setup menu, the same function as direction buttons. 8. VOL button Press to decrease or increase the volume. 2 9. 10. 11. 12. 13.
View of Unit (Continued) Back Panel Open the back cover on the right side of the unit's rear panel, and you will see all jacks, as shown below: TV PC IN AUDIO 1. 2. 3. 4. 5. Y/Pb/Pr Input Jacks Connect Y/Pb/Pr signal source in COMPONENT mode. L/R Audio Input Jacks (for Y/Pb/Pr) Connect L/R audio signal source in COMPONENT mode. AV Output Jack Output TV or COMPOSITE signals to external AV input device. L/R Audio Output Jacks Output L/R audio signal to external AV input device.
Remote Control View of Remote Control 1 2 22 3 23 4 24 5 25 6 26 7 8 27 9 28 10 29 11 30 12 13 14 31 15 32 16 33 17 34 18 35 19 36 20 37 21 38 1. POWER button Press to enter or exit standby mode. 2. TV button Press to shift to TV mode. 3. DVD button Press to shift to DVD mode. 4. P.M. button Press to shift the screen picture modes to different brightness settings: User, Standard, Soft, Bright and Shine. 5. S.M.
Remote Control 19. MENU button (under DVD mode) Press to enter disc menu in DVD mode; press to exit teletext mode in teletext mode 20. SETUP button Press to enter or exit setup menu in DVD mode; press to display the index page in teletext mode. 21. SLOW button Press to activate slow playback function in DVD mode. In teletext mode, press to display the concealed information, such as solution to puzzles; press again to conceal the information. 22. D-SUB button Press to shift to VGA mode. 23.
Remote Control Preparation of Remote Control Using of Remote control Softly push the back cover to open the battery compartment. Point the remote control unit from no more than about 7m from the remote control sensor and within about 60 degrees of the front of the unit. Insert two batteries 1.5V, size AAA), please make sure the polarity matches the marks inside the compartment. 7M Softly press the back cover to close it. The operating distance may vary depending to the brightness around.
System Connections Do not connect the power cord until all other connections have been made. Ensure that you observe the colour cables when connecting audio and video cables. Before connecting, open the cover on the right side of the unit's rear panel. Connecting Power Supply Power is supplied through the provided power adapter. Connect one end of the adaptor to the unit's power jack on the jack panel of the unit and the other end to the wall AC outlet.
System Connections (Continued) Connecting External AV Signal Source AV SIGNAL SOURCE Use the AV cables to connect external AV signal source to AV input jacks on the jack panel of the unit. And use the S-Video cable to connect external S-Video signal source to the S-VIDEO input jack on the rear panel of the unit. TV PC IN AUDIO After connection, turn on the unit and the external AV signal source and press the SOURCE button to shift to COMPOSITE or S-VIDEO mode.
System Connections (Continued) Connecting External AV Device (AV Output) Use the AV cables to connect external AV device to the audio and video output jacks on the jack panel of the unit to output TV or COMPOSITE signals. TV PC IN AUDIO After connection, turn on the unit and external AV device and press the SOURCE button to shift to corresponding mode.
System Connections (Continued) Connecting PC Follow the steps and figure below to connect PC to the unit. 1. 2. 3. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit and the other end to the PC. Connect one end of the audio cables to the PC audio input jack on the rear panel of the unit and the other end to the PC audio output jack. Set the PC's resolution at 800x600@60Hz.
System Connections (Continued) Connecting TV Antenna Connect TV signal source to the TV jack on the jack panel of the unit. TV PC IN AUDIO After connection, turn on the unit and press the SOURCE button to shift to TV mode. If you have been scanned TV programs, take the following steps to select a channel. 1.
TV Function Preparation 1. 2. After connection, press the POWER button to turn on the unit. Press the SOURCE button to shift to TV mode. You can go on with the following operations. Image Setting Press the MENU button once to enter the setup menu. Press the button to select Image and press the ENTER button to enter the menu shown on the right. In the Image setup menu, press the button to select the desired item. Press the MENU button to return to the previous menu.
TV Function Brightness Setup Press the button to select Brightness and press the button to adjust the value . Press the MENU button to return to the previous menu. Image Scheme Audio Picture Timer Brightness Setup Contrast 61 Hue Color Sharpness Advanced Contrast Setup Press the button to select Contrast and press the MENU button to return to the previous menu. button to adjust the value. Press the Hue Setup Press the button to select Hue and press the button to adjust the value.
TV Function When the VGA signal is connected to the unit, the Advanced setup menu is shown below: Image Press the " " button to select the desired item and press the "ENTER" button to enter it's setup menu. Press the "MENU" button to return to the previous menu. Advanced Audio Auto Adjust Timer Image Pos Setup Phase Clock Auto Color SRGB Auto Adjust: If the monitor is not clear, you should carry out "Auto Adjust".
TV Function Audio Setting Press the MENU button once to enter the setup menu. Press the button to select Audio and press the ENTER button to enter the menu shown on the right. In the Audio setup menu, press the button to select the desired item. Press the EXIT button to return to the previous menu. Volume Setup Press the button to select Volume and press the MENU button to return to the previous menu. Bass Setup Press the button to select Bass and press the button to return to the previous menu.
TV Function Timer Setting Press the MENU button once to enter the setup menu. Press the button to select Timer and press the ENTER button to enter the menu shown on the right. In the Timer setup menu, press the button to select Off, 15Min, 30Min, 45Min, 60Min, 75Min, 90Min, 105Min or 120Min. Press the EXIT button to return to the previous menu. Image Audio Timer Off Setup Setup Setting Press the MENU button once to enter the setup menu.
TV Function Country Press the button to select the Country and press the ENTER button to enter the menu shown on the right. Press the button to select the desired item. Press the MENU button to return to the previous menu. PAL Tuner/Channel Image Audio Country Select Timer Australia Setup Belgium Britain France Czech Denmark Auto Scan Press the button to select the Auto Scan and press the ENTER button to start auto scan. The screen will display shown below: Auto scan CH No 8 FREQ 154.
TV Function Channel Name Press the button to select the Channel Number and press the ENTER button to enter. Then press the button to select letters or press the number buttons to input numbers. Press the MENU button to return to the previous menu. Skip Press the button to select Skip and press the ENTER button to activate or cancel this function. Press the MENU button to return to the previous menu. Swap Press the button to select Swap from Ch and press the ENTER button to enter.
TV Function CH NO Press the button to select CH NO and press the ENTER button to enter. Press the number buttons to enter the channel number. Press the button to return to the previous menu. Store Press the button to select Store and press the ENTER button to store the above operations. Note: The "CH NO" and "Store" items only function when the program is searched out. Language Press the button to select the Language, press the ENTER button to enter the setup, press the button to select item.
NICAM Function The unit support NICAM function under TV mode. Under NICAM TV broadcast: 1. When receiving stereo audio signals, press the STEREO/AUDIO button on the remote control repeatedly to shift the sound tracks between Nicam Stereo and Mono and the screen will appear corresponding display as shown below: Mono Nicam Stereo 2.
DVD Playback Preparation: Disc Loading Steps: 1. 2. 3. 4. Connect the unit to the power supply and press the POWER to turn on the unit. Press the SOURCE button and select DVD mode. Handing the disc with its printed side outward vertically to the disc tray and gently insert the disc into the disc tray. The disc will draw into the unit and load automatically. Warning: Do not play poor quality, scratched or warped discs that may damage the player's lens or impede the loading mechanism.
DVD Playback Fast Playback During playback, press the or button to activate fast backward or forward playback. During fast playback, press the PLAY button to resume normal playback. SLOW During DVD disc playback, press the SLOW button to activate slow playback. During slow playback, press the PLAY button to resume normal playback. Repeat Use the REPEAT button repeatedly to repeat a chapter, title or all. Some discs do not support the repeat function. Menu Normally there is a selecting menu for DVD discs.
DVD Playback CD Playback After loading a CD disc, the unit will play all tracks on the disc by default. You can use the button, or number buttons to select a track. Stop Press the STOP button once to stop playback and press the PLAY button to resume normal playback. Press this button twice repeatedly to stop playback completely. Pause Press the PAUSE button to pause the playback and then press the PAUSE button again or button to resume normal playback.
DVD Playback JPEG Playback JPEG is a common picture format that requires small amounts of storage per image and has low loss in resolution. Hundreds of pictures can be stored on a disc in this format. In order to view JPEG photo albums, you can ask your film development company to make a "PICTURE CD" when they develop your film. Play After loading a JPEG disc, a root menu displayed on the screen.
DVD Playback DIVX Playback Pre-operation DIVX is the name of a revolutionary new video code, which is based on the new DIVX compression standard for video. Load a DIVX disc in the disc tray, the player will search and play disc automatically. The screen displays the root menu. Use the , buttons to select desired item and press the ENTER button to play. Stop During playback, press the STOP button to stop playback and return to root menu and press the PLAY button to play the file from the beginning.
USB and SD/MS/MMC Card Function Preparation In DVD mode, connect USB device to the USB port or insert SD/MS/MMC card into the SD/MS/MMC card slot on the right side of the unit Note Make sure that files are stored in the USB and the SD/MS/MMC card before the connection. File Playback 1. Press the Card button to shift to desired mode and the screen will display the menu, as shown below: 00:00 00:00 001/002 BAK JPEG 2. Press the button to select the folder, and press Enter button to enter. 3.
DVD System Setup Preparations 1. 2. 3. In DVD mode, press the Setup button to open DVD setup menu. Press the button to select setup menu. Press the Setup button again to exit DVD setup. General Setup Page Press the DVD SETUP button to enter the General setup menu. The screen will display as the below: - - General Setup Page - - In the menu, Use the direction buttons to select the desired Item. Press the ENTER button to enter the item. Press the button to return.
DVD System Setup OSD Lang - - General Setup Page - - The item is used to select the OSD language. TV Display Angle Mark OSD Lang Captions Screen Saver Last Memory Media Center 1. PS On Eng Off On On English French Spanish German Italian Portuguese Dutch 2. 3. 4. Press the direction buttons to select OSD Lang. Press the ENTER button to enter the setup. Use the direction buttons to select items. Press the ENTER button again to confirm selection and return. Set OSD Language Captions 1.
DVD System Setup Media Center - - General Setup Page - TV Display Angle Mark OSD Lang Captions Screen Saver Last Memory Media Center PS On Eng Off On On DVD USB SD/MMC MS 1. Press the direction buttons to select Media Center. 2. Press the ENTER button to enter the setup. 3. Use the direction buttons to select DVD, USB, SD/MMC or MS. 4. Press the ENTER button again to confirm selection and return.
DVD System Setup Dynamic 1. - - Dolby Digital Setup - Dual Mono Dynamic FULL Str 2. 3/4 1/2 1/4 3. 4. 5. OFF Set Drc Off 6. Press the direction buttons to select Dynamic. Press the ENTER button to enter the setup, the screen will display as left: Press the OK button to enter. Use the direction buttons to adjust. Press the ENTER button again to confirm setting and return. Press the button to return. HDCD Setup In the Audio Setup Page, use the direction buttons to select HDCD Setup.
DVD System Setup Video Quality Setup Select Quality, press the ENTER button to enter the menu as below: - - Video Quality Setup - Sharpness Brightness Contrast Med 00 00 1. High Medium Low 2. 3. In the menu, Use the direction buttons to select the desired item. Press the ENTER button to enter the item. Press the button to return. Sharpness Sharpness - - Video Quality Setup - Sharpness Brightness Contrast Low 00 00 1. High Medium Low 2. 3. 4. Press the direction buttons to select Sharpness.
DVD System Setup Preference Setup Note: This item is only available when there is no disc in the disc tray or the disc is stopped completely Press the DVD SETUP button to enter the General setup menu, then use the direction buttons to select Preference Page, the screen will display as the below: - - Preference Page - Audio Subtitle Disc Menu Default In the menu, press the ENTER or direction button to select the desired item. Press the ENTER button to enter the item. Press the button to return.
DVD System Setup Default - - Preference Page - Audio Subtitle Disc Menu Default 1. Eng Off Eng Reset 2. 3. Press the direction buttons to select Default. Press the ENTER button to select Reset. Press the ENTER button, all the settings will return to the default status.
Troubleshooting Take steps described in the tables below to solve simple problems before contacting customer service. If you suspect something wrong with this unit, immediately turn the power off and disconnect the power connector from the unit. Never try to repair the unit yourself because it is dangerous to do so. SYMPTOM CHECK ITEM There is no display on the screen. Make sure the unit is turned on and all connections correct. There is no sound.
Specifications Resolution 800 x 600 TFT-LCD Screen Size 20 inches Power AC100~240V, 50/60Hz Power Consumption <60W Dimension 490mm x 478mm x 184mm (LxWxD) Weight About 9.52 Kg DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. © 1992 -1997 Dolby Laboratories, Inc. All rights reserved.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.
