Flat Panel Television User Manual

Connections (continued)

Connect a VCR

SCART Cable

21 -pin SCART

connector

VCR

How to connect:

Connect the SCART Cable between the unit and the VCR.

To play VCR

1. Turn on your LCD TV, press SOURCE button on the remote

control.

2. Push ENTER (Up/Down) to select Scart2 AV and press ENTER to

confirm.

3. Turn on your VCR, insert a videotape and press the Play button.

Note:

The unit receives CVBS (VIDEO) signal and Y/C (S-VIDEO) signal from SCART2 interface.

When receiving Y/C signal, you need to select Scart 2 Y/C instead of Scart 2 AV in the source select menu.

Therefore, if you find that the colour is not properly displayed, please try to select Scart 2 Y/C.

To connect to external devices with AV terminals, you may use 2 I-pin Scart Converter to connect to SCART

interface on the unit, then please select Scart 2 AV and the unit receives CVBS (VIDEO) signal only.

Select Main Source

1. TV

2. Video

3. S-Video

4. SCART 1

5. SCART 2 AV

6. SCART 2 Y/C

7. YPbPr

8. D-Sub

9. HDMI

Rear of the VCR

S-VIDEO