OWNER'S MANUAL 34CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 3430G Type Tested Electrical Safety AS/NZS 3250 Lic 4163 Standards Australia APP No: N15957 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.
Contents Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference. Note: Screen displays and illustrations in this manual may differ from the actual ones for better visibility. CONTENTS Features ......................................................................................
Features Hyperband Intellectualised I 2 C bus control 255 preset channels Automatic channel preset Full function remote control AV input and output terminals Clock/Game/Calendar Digital AFT technology Four picture modes ON timer/OFF timer Channel exchange Safe mode 1
Important Safety Cautions 1 When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. 2 Do not expose the TV set to rain or excessive moisture. Avoid using the set in very warm or damp places and never use it in a bathroom. 3 When cleaning dust off the picture tube disconnect the power first. You can wipe lightly with a piece of dry, clean and soft cloth.
! This TV set can operate on an AC power of 240V, 50Hz. You must not use a power supply of any other type. 6 Do not cover the ventilating hole in the cabinet Keep a space of more than 5 cm from the walls to the TV set to ensure adequate ventilation. 7 If the power cord or the plug is damaged contact a qualified service department for service. 8 When the TV set is to be left unattended for a long period of time, turn off the power supply and remove the plug from the wall outlet.
Identification of Controls Front POWER SWITCH INDICATOR REMOTE SENSOR 1 2 3 4 5 1. 6 7 Earphone Jack AV/TV input terminals (VIDEO, AUDIO L, R). 2. AV/TV button: Video input select. 3. MENU button: To enter into menu operation. 4. VOL- button: volume down adjust; menu item adjust 5. VOL+ button: volume up adjust; menu item adjust. 6. CH- button: channel down select; menu item select. 7. CH+ button: channel up select; menu item select.
Back 4 1 3 2 1. Antenna input 2. S-VIDEO input 3. AV input (VIDEO, AUDIO L/MONO, R) 4.
Identification of Controls (continued) Remote Controller Power on/standby Direct channel selector Previous channel Digit select Picture mode select Break Playing game Calendar Undo operation in game Help in menu operations To enter MENU operation Channel up Volume down Volume up Channel down TV/VIDEO input select Sleep timer On-Screen call Sound mute Menu control ! Notes: In most cases, the function CH+/- buttons are equal to the function of VOL+/- buttons are equal to the buttons.
Effective range of the Remote Installing batteries 1 Open the battery cover. 2 300 300 5m Install two "AAA" batteries matching the +/- polarities of the battery to the +/marks inside the battery compartment. 3 Replace the battery cover. ! Notes: The battery life should be about one year under normal use. Do not try to recharge batteries not intended to be recharged. Use only the size and type of batteries specified. Do not mix different types of batteries together or old batteries with fresh ones.
Installation INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Antenna installation Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and position of the aerial will depend upon your particular area.
Connect to video and audio equipment This TV set provides AV input terminals for your convenient connection to VTR, DVD or video camera to enjoy the high quality picture. Please refer to the owner's manual of the equipment to be connected as well. Important notes on the AV input terminals Please do not connect and use the side and rear input terminals at the same time. You can connect a stereo system to the AV output terminals on the set to enjoy a high quality sound from the stereo system.
Menu Introduction In MENU operations, the CH+/- (or ) buttons are used to select item upwards or downwards; the VOL+/- (or / ) buttons are used to adjust or confirm selected item. Join to page 11 The selected item displays in yellow.
! Notes: In most cases, the function of CH+/- buttons are equal to the buttons; and the function of VOL+/- buttons are equal to the / buttons. Join to page 10 ted and there are some items that are not displayed yet, the or symbol twinkles. perations (Press HELP button to display/cancel this help bar). ast. ! tness. The Picture menu will be shielded if you set the AdjLimit item to Off in SafeMode. ness. colour. (This item is available only in NTSC) To set SafeMode function to On or Off.
Turning on/off Turning on 1. Press the Power Switch on the TV set. If no picture appears, then the TV set is in STANDBY mode. Now please follow step 2. 2. In STANDBY mode, press the button on the remote controller and the TV set is turned on. 1 3. In STANDBY mode, you can also press the AV/TV button on the set to turn on. ! Notes: 3 2 If there is no input signal, then a blueground appears. After 15 minutes, the set auto goes to STANDBY. Turning off 1.
Select Input Signal Select input signal 1. Press AV/TV button on the TV set or AV button on the remote control. When the set is in TV mode, press this button and the set goes to AV mode. Now you could watch video program from AV input terminals. If you want to switch to TV press AV button again or follow step 2, 3 or 4. 2. Press the digit buttons to switch back to TV mode. 1 3 3. Press CH+ or CH- button to switch back to TV mode. 4. Press 2 4 5 button to switch back to TV mode.
1. Press MENU button four times to display Program menu. 2. Press CH+/- button to select item. 3. Press VOL+/- button to confirm or adjust the selected item. Tuning in Auto Search Enter the Program menu and select Auto item. Press VOL+ or VOL- button and the TV set starts Auto Channel Preset. All Active channels will be preset and stored into the memory automatically. After presetting, the TV will stop at the last channel program.
Channel Skipping You can skip unnecessary channels by using Skip function when you browse by CH+/- buttons. Please select a channel number with digit buttons or CH+/- buttons. You can also enter program menu, select Display item and adjust with VOL+/buttons manually to select the desired channel number (from 0~254). For example channel 9. 1 3 2 In Program menu, please select Skip item and press VOL+ or VOL- button to select On. Now channel 9 will be skipped when you browse channel by CH+/- buttons.
Tuning in (continued) Channel exchange When auto channel preset is finished, you can edit the order of programs by using the channel exchange function. 1 3 2 Please enter Program menu and select Target item. Press VOL+ or VOL- button to select a target channel number that you would like to exchange with the current channel. Then select Channel Change item and confirm with VOL+/buttons. Now the programs in the current channel and target channel will exchange.
Channel Selection 1. Use Direct Channel Selector (0-9 and -/-- buttons) To select one-digit channel: Press 0-9 direct channel selector. Press -/-- button repeatedly to display "-". 8 To select two-digit channel: -- Press 1-9 Press -/-- button repeatedly to display "--". -1 buttons. Press 0-9 buttons. 18 2 To select three-digit channel: 1 Press -/-- button repeatedly to display "--" --- -- 1 -16 168 3 Press 1-2 buttons. Press 0-9 buttons. Press 0-9 buttons.
Adjusting Picture 1. Press MENU button to display Picture menu. 2. Press CH+/- button to select item. 3. Press VOL+/- button to adjust the selected item. 1 3 2 Item VOL- VOL+ Contrast Color Brightness Sharpness Tint* weaker paler darker softer purplish stronger deeper lighter sharper greenish * Note: The item TINT is for NTSC only. The adjusted settings are stored in the Personal mode. There are three preset picture modes and one User-set picture mode.
Sound Control 1. Use VOL+ or VOL- button. Press VOL+ button, the volume increases; Press VOL- button, the volume decreases. 2. Use MUTE button. Press MUTE button, and the volume decreases to half of the original volume before you adjust. This mode is useful when many people are watching TV and one of them is going to answer a telephone call. 1 Press MUTE button again to mute the sound completely. In this mode, you can resume the sound of half of the original volume by pressing VOL+/- buttons.
Clock Setting Setting sleep timer Please enter the Clock menu and select Sleep item. Press VOL+ or VOL- button to select between Off, 10, 20, 30, 40, 50 and 60 (minutes). When the sleep time elapses, the TV set goes to STANDBY automatically. You also can set the sleep time by using SLP button directly. 1 3 2 Setting clock Please enter the Clock menu and select Timer item. Press VOL+ or VOL- button to set current time.
Setting ON timer Please enter the Clock menu and select TimeOn item. Press VOL+ or VOL- button to set ON Time. After you finish setting Time On item, press the STANDBY button on the remote control. Then the TV set auto turns on when your preset time elapses. Clock Sleep Timer TimeOff TimeOn Alarm Channel 60 10 : 00 22 : 00 18 : 00 -- Notes: The Alarm Channel item is available only after you finish setting Time On item. 1 3 2 Setting alarm channel Please enter the Clock menu and select Alarm item.
System Setting 1. Press MENU button twice to display System menu. 2. Press CH+/- button to select item. 3. Press VOL+/- button to adjust the selected item. Setting OSD language Please enter the System menu and select Language item. Press VOL+ or VOL- button to select the OSD Language. Setting blue background 1 3 2 Calendar HELP 1 Please enter the System menu and select BlueBack item. Press VOL+ or VOL- button to select On or Off.
Playing Game Please enter the System menu and select Game item. Press VOL+ or VOL- button to enter Game Select menu. Press CH+ or CH- button to select Box Man Map item and select a game map with VOL+ or VOL- button. Press CH+ or CH- button to select Game Start item, press VOL+ or VOL- to start game. 1 3 2 Notes; You also can enter into Game interface directly by using GAME button How to play the name? Description of icons: :the man you control. :the box to push. :the destination to push the box to.
Safe Mode SafeMode introduction 1 3 2 Please enter the System menu and select SafeMode item. Press VOL+ or VOL- button to enter SafeMode menu. If you never set password for Safe Mode or you set the SafeMode item to Off, you can directly enter into SafeMode menu without password, otherwise, a four digit password is necessary before you can enter into SafeMode menu. The TV set exit the menu automatically if you continuously input wrong password three times. There are nine items in the SafeMode menu.
Setting CH.Limit item Please enter the SafeMode menu and select CH.Limit item. Press VOL+ or VOL- button to select the limitation channel number ranging from 0-254. For example, you can set the limitation channel number to 99, the the user can only select the channel from 0-99. Making use of channel limitation and channel exchange functions, you can limit some channels and turn off the Program menu to forbid other user watching these channels programs.
Safe Mode Setting OnSearch item Please enter the SafeMode menu and select OnSearch item. Press VOL+ or VOL- button to select On or Off. If you set this item to On, next time you turn on by Power Switch, the TV set searches program and set system automatically (please make sure that the antenna connection is OK before you turn on). Once the OnSearch is fulfilled successfully, this item will be set to Off automatically so that the set does not search program when you turn on by Power Switch next time.
Troubleshooting Guide Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Symptoms Check the following items Power is not turned on Be sure the power cord is plugged in. Poor colour, poor tint Contrast, colour, tint are not correctly adjusted. Spots appear on the screen Possible interferences of automobiles, motorcycle, trolley bus, neon lamps, etc.
Specifications Power Supply: AC 240V, 50Hz Power Consumption: 60W Dimensions (mm): 436 (W) x 340 (H) x 380 (D) Weight: 12 kg CRT: 34 cm TV system & channel range System VHF UHF CATV PAL-B/G X~Z+2,S1~S41 2-12 21-69 Colour System: PAL-B/G NTSC playback Sound output: 1.5W x 2 Accessories: Remote controller X 1 ! Design and specifications are subject to change without notice.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.
