OWNER'S MANUAL 68CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 6875PF N111 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.
Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference. Screen displays and illustrations in this manual may differ from the actual ones for better visibility.
Contents Features ........................................................................................................................ Important Safety Cautions .......................................................................................... Identification of Controls ............................................................................................ Front view .................................................................................................................
Features USOC and Intellectualized I2C-bus control Five picture modes Two groups of Video/Audio input terminals One S-Video terminal One group of DVD (Y,Cr,Cb) input terminals Video/Audio output terminal Program exchange/Program copy Game/Calendar Child lock function 200 channels Music TV function Noise reduction Image enhancing Programs classified Screen protecting function 1
Important Safety Cautions When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. Do not expose the TV set to rain or excessive moisture. Avoid using the set in very warm or damp places and never use it in a bathroom. When cleaning dust off the picture tube disconnect the power first. You can wipe lightly with a piece of dry, clean and soft cloth.
This TV set can operate on a power of ~240V, 50Hz. You must not use a power supply of any other type. Do not cover the ventilating hole in the cabinet Keep a space of more than 10cm from the walls to the TV set to ensure adequate ventilation. If the power cord or the plug is damaged contact a qualified service department for service. When the TV set is to be left unattended for a long period of time, turn off the power supply and remove the plug from the wall outlet.
Identification of Controls Front view 1 2 3 TV/AV MENU VOL- VOL+ CH- CH+ 4 5 6 7 8 9 1. Power Switch 2. Remote sensor. 3. Indicator. 4. AV/TV button: Video input select. 5. MENU button: To enter into menu operation. 6. VOL- button: volume down adjust; menu item adjust. 7. VOL+ button: volume up adjust; menu item adjust. 8. CH- button: channel down select; menu item select. 9. CH+ button: channel up select; menu item select.
Back view VIDEO R L (2) 6 (1) DVD VIDEO VIDEO Y 1 S-VIDEO L L CB AUDIO AUDIO R 5 R CR 4 2 2 1. Antenna input 2. AV output (VIDEO, AUDIO L, R) 3. DVD input (YCbC r , AUDIO L, R) 4. AV1 input (VIDEO, AUDIO L, R) 5. S-VIDEO input 6.
Identification of Controls (continued) Remote control Power on/standby Direct Channel select Sound Mute 1 2 3 4 5 6 PRESET To display PRESET menu 7 8 9 SLEEP Sleep timer AV 0 Previous channel TV/VIDEO Input select PIC DSP CH On-screen display call To display the PICTURE menu Volume down/menu item adjust Channel down/menu item select MENU VOL VOL Volume up/menu item adjust Channel up/menu item select This button has no function in this model Picture mode select S.
Battery Installation Please install the batteries before using the remote control. 2 Install two "AA" batteries 1 Open the battery cover. matching the +/- polarities of the battery to the +/marks inside the battery compartment. 3 Replace the battery cover. Effective range of the remote control Notes: 30 1. There should be no obstacle between the TV and the transmitter. 2. Use the remote control within the effective range as the above figure. 3.
Installation Connecting antenna Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna must be used. The exact type and position of the antenna will depend upon your particular area. Notes: Turn off the power first, when you connect an outdoor antenna to the antenna input terminal. When installing an outside antenna system, extreme care should be taken to keep from touching power lines or circuits as contact with them might be fatal.
Connecting video and audio equipment This TV set provides 2 groups of AV input terminals (including 1 group of DVD and S-Video input terminals) for your convenient connection to VCR, DVD or other video equipment to enjoy the high quality picture. Please refer to the owner's manual of the equipment to be connected as well. Connecting the rear AV and DVD input terminals.
Connecting the side AV input terminals Yellow (VIDEO) White (AUDIO L) Red (AUDIO R) W (2) To Video outputs To Audio output Y VIDEO R R L VIDEO EQUIPMENT W R Y Signal Y Connecting the AV output terminals (1) VIDEO S-VIDEO DVD Y VIDEO CB AUDIO AUDIO CR Audio Amplifier 10
Operations Menu Introduction Press the MENU button repeatedly to select the screen display as below. In menu operation, press CH+/- to select item, press VOL+/- to adjust selected item.
Operations Turning On/Turning Off Turning On 1 Press the MAIN POWER SWITCH to turn on the TV set. 2 If the TV set is in STANDBY mode, press , CH+/- or 0-9 (one digit only) on the remote control, then the TV set is turned on. When the remote control is not at your hand, you can also press the CH+/- buttons on the TV set to turn on the TV. Note: If there is no input signal to the TV when the TV is on, blue background will appear on the screen (when the BACKGROUND is set to ON).
Operations Presetting programs Firstly, use the Auto search function to preset all active channels in your area automatically. Then arrange the preset channels with the manual search and program edit functions. Auto Search Press the MENU button to select PRESET menu. Press CH+/- to select AUTO SEARCH. Press VOL+/- and the TV set starts Auto channel preset. All active channels will be preset and stored into the memory automatically. After presetting, the TV will display the first channel.
Operations Presetting programs (continued) Fine Tuning When picture and sound's effect of a channel is poor (for example: one or two CATV channel's picture and sound are not standard), you can correct them by making use of Fine tuning. Access the PRESET menu, then select PROGRAM item by CH+/- and set the desired channel number (from 0~199) by VOL+/- or Digit buttons. In the menu, select FINE TUNE item, then press and hold VOL+/- buttons until the best picture and sound are obtained.
Operations Editing programs Channel skipping After presetting the channels, you can skip unnecessary position numbers so that only the channels you want are selected. Access the PRESET menu, then select PROGRAM item by CH+/- and set the desired channel number (from 0~199) by VOL+/- or Digit buttons. PROGRAM TYPE BAND SKIP FINE TUNE MANUAL SEARCH AUTO SEARCH SEL 008 USER2 V-H OFF ADJ In the menu, please select SKIP item and press VOL+/buttons to select ON.
Operations Editing programs (continued) Channel exchange/copy After channel presetting, you can edit the programs by using the channel exchange and channel copy functions. Press MENU button repeatedly to access the SWAP menu. Select PROGRAM item and select a channel number A by Digit buttons. Select EXCHANGE item and press Digit buttons to set another channel number B that you would like to exchange with the program number which is displayed in the PROGRAM item. Then press VOL+/- buttons to confirm.
Operations Selecting Channel/input signal Selecting channel 1 Use Digit buttons To select one-digit channel - Press --/-- button to display "-". Press 0-9 direct channel selector. 8 To select two-digit channel -- Press --/-- button repeatedly to display "--". 18 1Press 0-9 buttons. Press 1-9 buttons. To select three-digit channel 1- Press --/-- button repeatedly to display "1--" 168 1- Press 0-9 buttons. Press 0-9 buttons.
Operations Adjusting the picture/sound Adjusting the picture 1 Using the PP button: You can press PP button to select the desired picture mode: MILD, STANDARD, NATURE, CUSTOM, COLORFUL. NATURE CUSTOM COLORFUL MILD STANDARD 2 Mode Picture quality MILD Soft and moody picture STANDARD NATURE Standard picture Normal picture COLOURFUL Bright and dynamic picture CUSTOM The picture quality you set Using the PICTURE menu: Press MENU button or PIC button to access the PICTURE menu.
Operations Clock Setting Press MENU button repeatedly to access the CLOCK menu. Current time setting Select TIME item. Press VOL- button to set the hour (0~23). Press VOL+ button to set the minute (0~59). Note: The ON-TIME and OFF-TIME can be set only after you finish setting the TIME item. TIME OFF-TIME ON-TIME CH-TIME PROGRAM SEL 14:03 --:---:---:---- ADJ Off timer setting Select OFF-TIME item. Set the OFF time. Press VOL- to set the hour (0~23). Press VOL+ to set the minute (0~59).
Operations Clock Setting Setting channel timer Select CH-TIME item. Set the CH-TIME. Press VOL- to set Press VOL+ to set minute (0~59). TIME OFF-TIME ON-TIME CH-TIME PROGRAM SEL 14:02 14:07 15:30 16:21 --- ADJ Select PROGRAM item. Set the channel number by Digit or VOL+/- buttons. TIME OFF-TIME ON-TIME CH-TIME PROGRAM SEL The TV set will switch to the preset channel when the CH-TIME elapses.
Operations System Setting Background Setting With the background function ON, when no signal is being received, a preset background and customer's logo will appear. Access the SYSTEM1 menu. Press CH+/- buttons to select BACKGROUND item. Press VOL+/- buttons to select ON or OFF. COLOR SYS SOUND SYS BACKGROUND PROGRAM EXCHANGE COPY SEL AUTO B/G ON 007 ----ADJ Colour/sound system setting Press C-SYS or S-SYS button on the remote control repeatedly to set colour system or sound system.
Operations Other functions introduction Game introduction There is a built-in game (Box man) for you to play. Press GAME button to access game interface. Description of icons: :the man you control. :the box to push. :the destination to push the box to. :the wall. STAGE: 1 STEP: 000 On the screen, press PP button select STAGE, then you can start game. The player should control the man to push the box just push, not pull) to the destination within the wall by using CH+, CH-, VOL+, VOL- buttons.
Operations Other function introduction Image Enhance setting With built-in image enhance circuit you can use the function to improve the visibility of details near black. Access the SYSTEM2 menu. Press CH+/- buttons to select IMAGE ENHANCE item. Press VOL+/- buttons to select ON, the image enhance is available. ON ON IMAGE ENHANCE NR CALENDAR GAME ADJ SEL Noise Reduction setting If the signal being received is weak and the picture is blurry, active this function to improve the picture quality.
Operations Other functions introduction Setting music TV function If you only want to listen to the music, you can press MUSIC button and the screen displays MUSIC TV. Five seconds later, the screen is blank while the sound is normal. Press any button on the remote control to exit MUSIC mode. MUSIC TV Sleep timer Press SLEEP button repeatedly to set sleep time from 15 minutes to 120 minutes. When the sleep time elapses, the TV set goes to STANDBY mode automatically.
Troubleshooting Guide Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Symptoms Check the following items Power is not turned on. Be sure the power cord is plugged in. Poor colour, poor tint. Contrast, colour, tint are not correctly adjusted. Spots appear on the screen. Possible interferences of automobiles, motorcycle, trolley bus, neon lamps, etc. Stripes appear on the screen.
Specifications Power Supply: AC 240V, 50Hz Power Consumption: 140W Dimensions (mm): 760 (W) x 595 (H) x 490 (D) Weight (kg): 36 CRT: 68cm TV system & channel range System VHF UHF CATV PAL-B/G X~Z+2,S1~S41 2-12 21-69 System: PAL-BG, NTSC (AV) Sound output: 4W x 2 Accessories: Remote controller x 1 Design and specifications are subject to change without notice.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 5944033370 XMH Ver 1.