Specification Sheet

06/09
Tel: [phone] Fax: [phone] www.pamexinc.com [e-mail]
4680 Vinita Court, Chino, CA 91710
Model: BGBSS-1212E, 1218E, 1224E, 1230E, 1232E,
1236E, 1242E, 1248E
Exposed Stainless Steel Grab Bar
Product Specifications
Bath Accessories
Available Finish:
 Stainless Steel
ADA
Features
 Material: 304 Satin Stainless Steel Bar
 Exposed Surface Mount Application
 Bar Wall Thickness: 0.050” (18 Gauge)
 Flange Wall Thickness: 0.073” (14 Gauge)
 3” Diameter Mounting Flange w/ 3 Hole Mounts
 2” Stainless Steel Mounting Screws
 1-1/2” Wall Clearance
 Tested to Withstand 250lbs. Push/Pull When Properly Installed
Installation
 Please note that screws MUST be mounted into a wood stud for
secure installation
 Locate the studs behind the wall by using a stud sensor or other
stud location method
 Position unit on wall in desired location
 Mark mounting holes
 Drill starter holes
 Mount unit on wall using 2” screws (provided)
15”, 21“, 27”, 33“, 35”, 39”, 45”, 51”
1-1/2”
12”, 18“, 24”, 30“, 32”, 36”, 42”, 48”
3”
3”
1-1/2”