Specification Sheet

06/09
Tel: [phone] Fax: [phone] www.pamexinc.com [e-mail]
4680 Vinita Court, Chino, CA 91710
Product Specifications
RIM TYPE
”8/5-2
”23/71-1
32-11/16”
1-1/2”
2-3/4”
Finish Availability:
AL: Aluminum (Painted)
DB: Dark Bronze (Painted)
PB: Polished Brass (Painted)
Series
E5000
UL Listed
Specifications
Door Height
For door up to 8'0" high -- 7'0" standard
Door Width
For door 2'6" to 4'0" wide -- 3'0" standard
Stile
4-1/4" min.
Mounting Height
40-5/16" from CL to finished floor
recommended
Mounting
Furnished standard with sheet metal &
machine screws
Cylinders
6-pin standard
Dogging
1/4" turn, hex key dogging
UL Listed
ANSI Grade 1
Operation
Material
Push bar of extruded anodized aluminum,
spring of stainless steel
Latch Bolts
3/4" throw, stainless steel
Dead Latch Bolts
5/8" stainless steel
Finish
Push bar-anodized, cover-painted
Strike
For 5/8" stop, plus shim for 1/2" stop
Protection
2-1/2" maximum, 1-7/8" depressed
Reversible
Non-handed. Reversible for all functions and
trims
Door Thickness
1-3/4" thick standard. Specify if other than 1-
3/4" trims
Backset
2-3/4"
Top Latchbolt
3/4" throw, stainless steel
Top Deadbolt
1/2" throw, steel bolt
Bottom Latchbolt
3/4" throw, stainless steel
Exit by slight pressure on any point on the
push bar at all time