Installation Sheet

LHR (LEFT HAND REVERSE)RHR (RIGHT HAND REVERSE)
1．Prepare door for exit device. See the exit device
instructions.
2．Prepare the door for trim.
INSTALLATION
A.Transfer vertical and horizontal center lines from the inside (exit device side)
of door to outside (trim side ) of the doors. Use extra care if the end of the
door is beveled.
B. Define the trim for RHR or LHR door installation.
C.Setting the trim for RHR or LHR by fixing the mounting studs as illustrated.
D.Locate and prepare the holes according for RHR or LHR door installation.
E.Apply exit device and thru-bolt to trim
and fix screw with washer onto lower
trim mounting stud.
LHR (LEFT HAND REVERSE)
RHR (RIGHT HAND REVERSE)
LHR (LEFT HAND REVERSE)
RHR (RIGHT HAND REVERSE)
Cutout: Metal door for this side.
Wood door: 1-1/2”(38mm) deep.
Ø1/2”(Ø12mm) DIA
RHR THRU
Ø1/2”(Ø12mm) DIA
LHR THRU
Ø1/2”(Ø12mm) DIA
RHR THRU
Ø1/2”(Ø12mm) DIA
LHR THRU
Ø7/8”(Ø22mm)
THRU
Ø1/2”(Ø12mm) DIA
THRU
TO FINISHED FLOOR 40-5/16(1024mm)
CLASSROOM PASSAGE
Ø1/2”(Ø12mm) DIA
THRU
Ø1/2”(Ø12mm) DIA
THRU
FIGURE REPRESENTS
LEFT HAND REVERSE DOOR
INTEROREXTERIOR
RHR
LHR
LHR (LEFT HAND REVERSE) RHR (RIGHT HAND REVERSE)
THRU HOLESTHRU HOLES
CLASSROOM / PASSAGE CLASSROOM / PASSAGE
RHR (RIGHT HAND REVERSE)
THRU HOLES
CLASSROOM / PASSAGE
LHR (LEFT HAND REVERSE)
THRU HOLES
CLASSROOM / PASSAGE
OUTSIDE THUMB PIECE TRIM
CLASSROOM / PASSAGE FUNCTION