Specification Sheet

E7000V
Vertical Rod
Vertical Rod Exit Device
10/2010
ADA
FEATURES & OPTIONS
Door Height
For all doors up to 7’0” or 8’0” high
Door Width
For all doors up to 36” or 48” wide
Stile
4-1/4” minimum
Material
Push bar is made of extruded anodize aluminum and spring is
made of stainless steel
Dogging
1/4” turn, hex key dogging (non-fire rated only, E7000)
Strike (Top & Bottom)
Top Strike: For 1/2” stop, plus shim
Top Latch
Latchbolt: 3/4” throw, stainless steel
Deadlatch: 1/2" throw, steel bolt
Bottom Latch
Latchbolt: 1/4" bolt, stainless steel
Mounting
Furnished standard with sheet metal & machine screws
Backset
2-3/4” standard
Handing
Non-handed
Projection
2-1/2” maximum projection, 1-7/8” when depressed
Operation
Exit by slight pressure on any point on the push bar at all time
FINISHES
□ Aluminum (Painted)
□ Dark Bronze (Painted)
□
Stainless Steel
WARRANTY
• Ten years mechanical warranty
• Five years finish warranty
CODE COMPLIANCE
• ANSI A156.3, Grade 1
• UL listed for Panic and UL10C, UBC 7-2-1997
codes
Available Trims
SPECIFICATIONS
Exit Device: Exit device shall be by Pamex
model # E7000V for standard exit opening. All
exit devices shall be modern push pad type with
vertical latching, non-handed. Hex-key dogging
shall be provided only on non-fire rated exit
device. Exit device shall be narrow profile;
projecting only 2-1/4” from the surface of the
door.
Heavy Duty
Lever Trim
(Handed)
Lever Trim
Knob Trim
Rim Cylinder
Double Pull
Cover Plate
Pull Plate
Rim Cylinder
Single Pull
Thumb Piece
Entry
Storeroom
Thumb Piece
Passage
Dummy