Specification Sheet

06/09
Tel: [phone] Fax: [phone] www.pamexinc.com [e-mail]
4680 Vinita Court, Chino, CA 91710
Series
Classic
Product Specifications
Function Length (A) Length (B)
Privacy
2-3/16" 2-3/16"
Passage
2-3/16" 2-3/16"
2-5/8”
3-15/16”
1-3/8”~1-3/4”
*Above Line Drawing Is Privacy Function Leverset
Spindle
T4 Strike Plate
Rose Assembly
Lever
1/2” Throw
Dead Latch
Wood Screws
Stems
Screws
Machine
A
1”
B
Door Prep.
Cross Bore: 2-1/8", Edge: 1"
Latch Backset
Exterior: 2-3/8" round corner deadlatch standard on all
exterior function levers.
Interior: 2-3/8" round corner plainlatch standard on all
interior function levers.
Door Thickness
Fits 1-3/8" to 1-3/4" standard.
Faceplate
1x2-1/4" round corner standard.
Strike Plate
2-1/4x1-3/4" full lip round corner standard.
Handing
Specify right or left door handed
Bolt
1/2" throw for all function
ANS/BHMA
A 156.2 Grade 3
Material
Zinc die-cast lever.
Function Description
Privacy
Both levers locked or unlocked by turnpiece inside.
Outside knob unlocked by coin or screwdriver.
Passage/Hall &
Closet
Both levers always free
Half Dummy Trim,
Surface Mounted
For doors where only pull is required.
Specifications
*Finish Availability - US 3, 5, 15A