Specification Sheet

06/09
Tel: [phone] Fax: [phone] www.pamexinc.com [e-mail]
4680 Vinita Court, Chino, CA 91710
Series w/ Push Button
Olympic
Product Specifications
3-3/8”
2-5/8”
1-3/8”~1-3/4”
*Above Line Drawing Is Entry Function Leverset
Spindle
T4 Strike Plate
Rose Assembly
Lever
1/2” Throw
Dead Latch
Wood Screws
Stems
5-pin Cylinder
Screws
Machine
B
A
Push Button
ADA
Door Prep.
Cross Bore: 2-1/8", Edge: 1"
Latch Backset
Exterior: 2-3/8" round corner deadlatch standard on all
exterior function levers.
Interior: 2-3/8" round corner plainlatch standard on all
interior function levers.
Door Thickness
1-3/8" to 1-3/4" standard.
Cylinder
5-pin "KW" keyway solid brass cylinder.
Faceplate
1x2-1/4" round corner standard.
Strike Plate
2-1/4x1-3/4" full lip round corner standard.
Handing
Specify right or left door handed
Bolt
1/2" throw for all function
ANS/BHMA
A 156.2 Grade 3
Material
Zinc die-cast lever.
Function Description
Entry
Both levers locked or unlocked by key outside or
turnpiece inside.
Privacy
Both levers locked or unlocked by turnpiece inside.
Outside knob unlocked by coin or screwdriver.
Bathroom-Split
Finish
Same function as privacy above. Inside lever polished
chrome.
Passage/Hall &
Closet
Both levers always free
Half Dummy Trim,
Surface Mounted
For doors where only pull is required.
Entry/ADA
Both levers locked or unlocked by key outside or
turnpiece(07) / push button(07C) inside.
Privacy/ADA
Both knobs locked or unlocked by turnpiece(08) / push
button(08C) inside. Outside knob unlocked by coin or
screwdriver.
Specifications
*Finish Availability - US 3, 5, 26, 32D/15
Function Length (A) Length (B)
Entry
2-7/16" 2-13/16"
Privacy
2" 2-3/8"
Passage
2" 2"
ADA-Turnpiece
2-7/16" 2-13/16"
ADA-Push Button-Entry
2-7/16" 2-13/16"
ADA-Push Button-Privacy
2-1/8" 2-9/16"
Model #
FLG607C (Entry)
FLG608C (Privacy)