Users Manual Part 2

● How to verify Master Card to a lock :

Prepare an invalid Mifare Card X(You may issue an invalid card easily by

assigning wrong area to the card). By default, a lock will report to MF-Admin Server

and get the newly create card list from MF-Admin Server every 5 mins(Wall Reader).

It means the newly created Master Card will go to the locks after 15 mins. Another

way to enforce a lock to communicate with MF-Admin server is to scan an invalid

card. We will use this approach to save us some time. Card X will be the invalid Card.

○ Go to lockplace A.

○ Scan Card X.

○ Scan Master Card and the lock should be opened.

○ Scan Card X again.(The event log will be transferred to MF-Admin server)

○ Check MF-Admin Server event log.

■ Navigate to MF-Admin Server event log page.

Report Management => Lock Events Report

■ Check Invalid Mifare in Event Type fields only and click Search.

■ You will see Invalid Mifare event with scanning invalid card.

○ Verify lock B, C, D, P, M using the same steps.

○ If lock A is not opened, please rescan Card X and try again.

○ If lock A is still not opened, please unlink the lock and register/link again.

Then repeat the verification steps.