Users Manual Part 2

Introduction
The Pamex Enkore series is a total solution for multi-family door access control. It not only
has several models of the lock but also the browser-based central management system
(MF-Admin server).
Figure 1 : Pamex Enkore System Architecture Overview
Figure 1 shows the system architecture of Pamex Enkore solution, Below are the brief
description of each component:
1. Chrome browser: The user interface to the MF-Admin Server (2). You need a PC with
a Chrome browser to use MF-Admin. The card reader/writer (No.6 in figure 1) will be
connected to this PC using USB. You may also use the windows server (5) as the
client PC.
2. MF-Admin Server: An application running on a Windows server (5). It provides all the
functions to manage the access control of the locks and the cards/fobs.
3. Wifi AP: All the Enkore locks have the wifi capability and are necessary to connect to
a wifi AP in order to be programmed by the MF-Admin server. There should be a few
to many Wifi APs at a multi-family property. Wifi AP is not part of Enkore products.
Check the lock specifications in the Appendix for the compatible Wifi AP.
4. Enkore smart locks and NFC cards: All the Enkore locks are smart locks that are
accessed using NFC card/fob (Mifare Desfire).
5. Windows Server: MF-Admin server is installed on this server.
6. Card Reader/Writer: MP100 is the default reader to issue a new card/fob to
users/residents.
4