Users Manual Part 2

Access Control Rule

It is time to elaborate how access rules works. All the locks will apply the access rule

when scan a card. Below is the default access rule settings :

You have to choose one of the three settings to apply to a combination of card types

and area types. The three choices are :

❖ Lock+Key : Area time control will be taken into consideration together with the

settings on the card/key to decide whether lock can be unlocked or not.

❖ Lock only : The system only takes area time control into consideration and

ignore the card/key settings.

❖ Key only : The system will take card/key setting into consideration and ignore

the area time control.

The NoPrivacy rule is a special rule for privacy locks ( the mode you set at lock

scheduling features ). The card type with NoPrivacy set to yes will ignore the private

mode which means the card is allowed to unlock the lock.

Therefore, if you like to block all users including the staff to enter swimming pool in

SIMPLE project, You have to do two things : 1. At lock scheduling function, set

lockplace P to private mode. 2. At lock access rule of system parameters function, set

Staff’s NoPrivacy to No.

❖ Steps to shut down swimming pool completely except Master Key

Previously we set swimming pool’s lock operation to Private mode, so let’s try

to edit Access Rule Control now. Navigate to edit page first.