Users Manual Part 2

之後刷卡可正常鎖門
弱電處理
鎖在每次運作後,
餘600次開關電力時 : 紅燈每10秒閃一次, 持續1分鐘
餘400次開關電力時 : 紅燈每5秒閃一次, 持續1分鐘
餘200次開關電力時 : 紅燈每2秒閃一次, 持續1分鐘
斷電處理
餘待機電力3個月, 可支援一次刷卡開門電力
Leverset & Deadbolt
Change the battery
(the first time after
tapping a recovery
card)
a beep with a red blink + motor adjustment + a red blink + a
green blink(finished with a latch appear) + a beep with a red
blink
Change the battery
A red blink with a beep + a red blink + a green blink + a red
blink + a green blink + a beep
(No motor adjustment, latch has no motion.)
Crypto Card
A green blink with a long beep.
Tap to lock
a beep with a green blink + the lock tongue in
Tap to unlock
a beep with a red blink + the lock tongue out
Invalid card
3 red blinks + 3 beeps
Red blinks between seconds lasting a minute as a
default.(Lock Out)
Construction Card
(same as lock/unlock)
Programming Card
2 green blinks with 2 beeps.
Red blinks continuously till a success connect with AP along
with a green blink + a long beep.
Note that only when tried every nearby APs will the lock stop
connecting.
Recovery Card
3 green blinks with 3 beeps + a green blink with a long beep >
+ reboot
Firmware upgrade
5 red blinks with 5 beeps + (5 green blinks with 5 beeps)* +
reboot
*Download success. If download failed will tell 3 red blinks
with 3 beeps)
Reboot
green blink with a long beep for 2 secs.
Test program
(Execute by taping
any card before
tapping a Crypto
A red blink + a green blink + a beep + motor adjustment + red
blinks continuously till a success connect with AP along with a
green blink and a long beep.
Note that it will last 30 secs as a default for keeping trying to
72