Users Manual Part 2

Lock Out 閉鎖

紅燈亮三分鐘(預設)

Wall Reader

Crypto card

a green blink with a long beep.

Tap to lock

a green blink with a beep.

Tap to unlock

a red blink with a beep.

Invalid card

3 red blinks with 3 beeps

Red blinks between seconds lasting 1 minute as a

default.(Lock Out)

Construction Card

(same as lock/unlock)

Programming Card

2 green blinks with 2 beeps.

Red blinks continuously till a success connect with AP along

with a green blink + a long beep.

Note that only when tried every nearby APs will the lock stop

connecting.

Recovery Card

3 green blinks with 3 beeps + a green blink with a long beep

+ reboot

Firmware upgrade

5 red blinks with 5 beeps + (5 green blinks with 5 beeps)* +

reboot

*Download success. If download failed will tell 3 red blinks

with 3 beeps)

Reboot

green blink with a long beep for 2 secs.

Test program

(Execute by taping

any card before

tapping a Crypto

card)

A red blink + a green blink + a beep, red blinks continuously

till a success connect with AP along with a green blink and a

long beep.

Note that it will last 30 secs as a default for keeping trying to

connect with the APs.

Lock Out

Red blinks for 3 mins as a default