Users Manual Part 2

Construction Phase

Make sure you have Crypto Cards and Construction Cards on hand. Crypto Card and

Construction Card are shipped from Pamex together with physical locks. (See

Appendix: Card Types)

In the scenario that wifi network and MF-Admin Server is not ready, and you have

installed locks on the doors, you will need Construction Cards to unlock and open the

door.

A lock can be unlocked using Construction Card only after it has successfully scanned

the Crypto Card but before programmed by programming card. No other cards can

unlock the doors at this moment.

A Construction Card can unlock any locks which have been scanned by Crypto Card

given by Pamex for your project only.

Depending on the lock model, the lock will present below response when scanning

Mifare Cards :

Lock Model

Crypto Card

Success

Crypto Card

Fail

Wall Reader

Green LED on 1 sec & long

beep once

Red LED flash 3 times &

beep 3 times

Deadbolt

Same as Wall Reader

Leverset

Same as Wall Reader

Interconnect

Same as Wall Reader

Construction Cards will remain valid until you scan Programming Card to a lock.

Programming Cards can only be created using MF-Admin Server which means your

wifi APs and network are ready and you are entering the next phase - Lock

Registration Phase.