Users Manual Part 2

Lock Registration Phase
MF-Admin Server is required to complete all the tasks in this phase. Please follow the
MF-Admin Server & MP100 Installation Guide  to install MF-Admin Server.
MF-Admin Server is a web-based application with access controlled by login id and
password. A newly installed MF-Admin Server has an admin user with login id = alzk,
password = alzk. You may use this account to access all the functions in MF-Admin
but we recommend you create another ids for all the users who need to access
MF-Admin. Please check MF-Admin Server User Guide  to see how to create users.
The default admin user alzk can not be removed. Change the password of alzk
immediately is recommended to secure the account. Please check MF-Admin Server
User Manual  to see how to change alzk password.
To better illustrate all the steps, we will use a SIMPLE example project to describe how
to complete all the steps.
Figure 17: Project SIMPLE
In the SIMPLE project, there are 4 families (A, B, C, D) with one common entrance (M)
and a shared swimming pool controlled by Lock P.
You will have to go through below steps to setup the MF-Admin server and register all
the locks by using alzk account :
9