User's Manual
Table Of Contents
- I Product introduction
- II Warning
- 4.1 Attentions
- III Packing list
- IV Start
- 4.2 Power off
- 4.3 Conference documents
- 5.1 Side shortkey menu
- V Main interface introduction
- 5.2 More
- 5.3 Writing
- 5.4 File
- 5.5 Setting
- 6.1 Standard configuration
- VI Configuration instruction
- 7.1 Built-in (option)
- VII Computer application
- 8.1 Computer interaction
- VIII Multi-screen interaction
- 8.2 Android Mobile projection
- 8.3 iPhone mobile projection
- IX Maintenance
At this point, the touch focus is on the sidebar, and the touch is not passed to the
built-in computer. If you need to continue to operate the built-in computer, you need
to click the right triangle icon in the shortcut menu of the sidebar to hide the shortcut
menu, then the touch focus will fall on the built-in computer.
8.1 Computer interaction
This feature is limited to models that support USB wireless transmission.
Make sure the 5G hotspot is turned on.
Reverse touch back is supported during the screen transfer process.
Insert the USB wireless screen transmitter into the USB port of the computer, the
system will automatically run the screen program and display the current status at the
bottom right of the screen. At this time, the screen light is flashing.
When the word “Shareable” appears on the lower right of the screen, the light of
the screen will be always on, indicating that the screen connection is successful.
(Some computer anti-virus programs will intercept the disc auto-run mode, you need
to manually select the disc to run, open the screen program.)
At this point, press the button of the screen to transfer the screen image to the
smart conference tablet. Press the button again, the screen exits and is connected.
Click to start the transmission, as shown below:
VIII Multi-screen interaction
33