PAN1326C2 Bluetooth Basic Data Rate and Low Energy Module Product Specification Rev. 1.
Overview Panasonic’s new PAN1326C2 is a Host Controlled Interface (HCI) Bluetooth Radio Frequency (RF) module that brings Texas Instruments Incorporated™ seventh generation Bluetooth core integrated circuit, the CC2564C, to an easy-to-use module format. The PAN1326C2 is Bluetooth 4.2 compliant and it offers best-in-class RF performance with about twice the range of other Bluetooth Low Energy solutions. Panasonic’s tiny footprint technology has produced a module of only 85.5 mm².
PAN1326C2 Bluetooth Module By purchase of any of the products described in this document the customer accepts the document's validity and declares their agreement and understanding of it is contents and recommendations. Panasonic reserves the right to make changes as required at any time without notification. Please consult the most recently issued Product Specification before initiating or completing a design. © Panasonic Industrial Devices Europe GmbH 2019. This Product Specification is copyrighted.
PAN1326C2 Bluetooth Module Table of Contents 1 2 3 4 5 6 About This Document......................................................................................................................... 6 1.1 Purpose and Audience .............................................................................................................. 6 1.2 Revision History ......................................................................................................................... 6 1.
7 PAN1326C2 Bluetooth Module Appendix ........................................................................................................................................... 48 7.1 Ordering Information ................................................................................................................ 48 7.2 Contact Details ........................................................................................................................ 49 Product Specification Rev. 1.
PAN1326C2 Bluetooth Module 1 About This Document 1 About This Document 1.1 Purpose and Audience This Product Specification provides details on the functional, operational, and electrical characteristics of the Panasonic PAN1326C2 module. It is intended for hardware design, application and Original Equipment Manufacturer (OEM) engineers. The product is referred to as “the PAN1326C2” or “the module” within this document. 1.2 1.3 Revision History Revision Date Modifications/Remarks 1.
PAN1326C2 Bluetooth Module 2 Overview 2 Overview Panasonic’s new PAN1326C2 is a Host Controlled Interface (HCI) Bluetooth RF module that brings Texas Instrument’s seventh generation Bluetooth core integrated circuit, the CC2564, to an easy-to-use module format. The PAN1326C2 is Bluetooth 4.2 compliant and it offers best in class RF performance with about twice the range of other Bluetooth Low Energy solutions. Panasonic’s tiny footprint technology has produced a module of only 85.5 mm².
PAN1326C2 Bluetooth Module 2 Overview The I/O are 1.8 V driven and might need external level shifter and Low-dropout regulator (LDO). The Pin MLDO_OUT cannot be used as reference due to RF internal connection. The total capacity will not exceed 2.8 µF. The total inductance will not exceed 0 nH. There are no voltage multiplying or voltage boosting circuits. 2.2 Pin Configuration PIN Assignment 0,55 C D A B 19 20 17 18 15 16 13 9.50 1.80 9.00 12 14 21 Pad = 28 x 0.60mm x 0.
PAN1326C2 Bluetooth Module 2 Overview Pin Functions No. Pin Name Pull at Reset Def. I/O Type 1 Dir. 1 GND 2 Description Connect to Ground 2 TX_DBG PU O 2 mA Logger output 3 HCI_CTS PU I 8 mA HCI UART clear-to-send 4 HCI_RTS PU O 8 mA HCI UART request-to-send 5 HCI_RX PU I 8 mA HCI UART data receive 6 HCI_TX PU O 8 mA HCI UART data transmit 7 AUD_FSYNC PD I/O 4 mA PCM frame synchronisation (NC if not used) FailSafe3 Fail Safe 8 SLOW_CLK_IN I 32.
PAN1326C2 Bluetooth Module 2 Overview For RF conducted measurements de-solder the antenna and solder an antenna connector to the hot pin. Pin Description HCI_CTS is an input signal to the CC2564C device: • • When HCI_CTS is low: CC2564C is allowed to send data to Host device. When HCI_CTS is high: CC2564C is not allowed to send data to Host device. No. Pin Name 5 Pull at Reset Def. I/O Type 4 Dir.
PAN1326C2 Bluetooth Module 2 Overview No. Pin Name Pull at Reset Def. I/O Type 4 Dir. 5 Description PA LDO input 11 CL1.5_LDO_IN 2.3 I Connect directly to battery or to a pre-regulated 1.
PAN1326C2 Bluetooth Module 2 Overview Full-DC2DC system (Lower RF output power, but optimum system power): Mixed DC2DC-VBAT system (Maximum RF output power and optimum system power, but requires routing of VBAT): 2.4 Clock Inputs The Slow Clock is always supplied from an external source. It is connected to the SLOW_CLK_IN pin number 8 and can be a digital signal with peak to peak of 0 V to 1.8 V. The Slow Clock's frequency accuracy must be 32.
PAN1326C2 Bluetooth Module 2 Overview 2.5 2.6 2.6.1 Bluetooth Features • • • • • Bluetooth 4.2 compliant up to the HCI layer • Assisted mode for Handset Profile (HFP) 1.
PAN1326C2 Bluetooth Module 2 Overview Flow control is obtained by the following: When the UART RX buffer of the CC2564C passes the “flow control” threshold, it will set the signal UART_RTS high to stop transmission from the host. When the signal UART_CTS is set high, the CC2564C will stop it is transmission on the interface. In case HCI_CTS is set high in the middle of transmitting a byte, the CC2564C will finish transmitting the byte and stop the transmission. 2.6.
PAN1326C2 Bluetooth Module 2 Overview When the I2S bus is used in an application, it is recommended adding a low pass filter (series resistor and capacitor to GND) to the bus for better noise suppression. Connecting the host μController/DSP directly with the module’s I2S interface is not recommended. The suggested low pass filter component values are: • • 2.6.2.2 470 pF 120 Ω Data Format The data format is fully configurable: 2.6.2.
PAN1326C2 Bluetooth Module 2 Overview Between each two frame synchronisations there are 70 clock cycles (instead of 100). The clock idle period starts 60 clock cycles after the beginning of the frame, and lasts 90 to 60=30 clock cycles. This means that the idle period ends 100 to 90=10 clock cycles before the end of the frame. The data transmission must end prior to the beginning of the idle period. 2.6.2.
PAN1326C2 Bluetooth Module 2 Overview 2.6.2.5 Two-Channel PCM Bus Example In below figure, a 2-channel PCM bus is shown where the two channels have different word sizes and arbitrary positions in the bus frame. (FT=Frame Timer). 2.6.2.6 Audio Encoding The CC2564C codec interface can use one of four audio-coding patterns: 2.6.2.
PAN1326C2 Bluetooth Module 2 Overview 2.6.2.8 Bluetooth/PCM Clock Mismatch Handling In Bluetooth RX, the CC2564C receives RF voice packets and writes these to the codec I/F. If the CC2564C receives data faster than the codec I/F output allows, an overflow will occur. In this case, the Bluetooth has two possible behavior modes: “allow overflow” and “don’t allow overflow”. 2.6.2.9 • “allow overflow”: The Bluetooth will continue receiving data and will overwrite any data not yet sent to the codec.
PAN1326C2 Bluetooth Module 3 Detailed Description 3 Detailed Description 3.1 Dimensions All dimensions are in millimeters. No. Item Dimension Tolerance Remark 1 Width 9.50 0.35 2 Length 9.00 0.35 3 Height 1.80 0.25 With case Product Specification Rev. 1.
PAN1326C2 Bluetooth Module 3 Detailed Description 3.2 Footprint 3.3 The outer dimensions have a tolerance of 0.35 mm. The layout is symmetric to center. The inner pins (2, 4, 6, 9, 11, 14, 16, 18, 21, 23) are shifted to the center by 1 mm. Packaging The product is a mass production status product and will be delivered in the package described below. Product Specification Rev. 1.
PAN1326C2 Bluetooth Module 3 Detailed Description 3.3.1 Tape Dimensions Y X X Y SECTION YSCALE 3.5 : Y 1 SECTION XSCALE 3.5 : X 1 Ao Bo Ko K1 F P1 W 3.3.2 9.90 9.40 2.80 2.00 7.50 12.00 16.00 +/- 0.10 +/- 0.10 +/- 0.10 +/- 0.10 +/- 0.10 +/- 0.10 +/- 0.30 (I) (II) (III) Tooling code: Flatbed - 9 Estimated Max Length: 72m per 22B3 (IV) Measured from centreline of sprocket hole to centreline of pocket. Cumulative tolerance of 10 sprocket holes is ± 0.20 .
PAN1326C2 Bluetooth Module 3 Detailed Description 3.3.3 Component Direction 3.3.4 1851211 PAN1326C2 ENW89823A5KF 01/04 Direction of unreeling (for customer) Machine readable 2D-barcode Pin 1 Marking (Top Side) Pin 1 Marking (Bottom Side) Circle r = 0.5 mm on solder resist near Pin 1 Reel Dimension Product Specification Rev. 1.
PAN1326C2 Bluetooth Module 3 Detailed Description 3.3.5 Package Label Example 3.3.6 (1T) Lot code (1P) Customer order number, if applicable (2P) Order number (3P) Brand name (9D) Date code (Q) Quantity (HW/SW) Hardware/software version Total Package Product Specification Rev. 1.
PAN1326C2 Bluetooth Module 3 Detailed Description 3.4 Case Marking Example 1 Brand name 2 Engineering Sample (optional) 3 Order number 4 Hardware/software version 5 2D Data Matrix Code 6 ISED marking 7 Lot code 8 Marking for Pin 1 9 FCC ID marking Product Specification Rev. 1.
PAN1326C2 Bluetooth Module 4 Specification 4 Specification All specifications are over temperature and process, unless indicated otherwise. 4.1 Default Test Conditions Temperature: Humidity: Supply Voltage: 4.2 25 °C ± 10 °C 40 to 85 % RH 3.3 V Absolute Maximum Ratings The maximum ratings may not be exceeded under any circumstances, not even momentarily or individually, as permanent damage to the module may result. All parameters are measured as follows unless stated otherwise: 6 VDD_IN =3.
PAN1326C2 Bluetooth Module 4 Specification 4.3 Recommended Operating Conditions The maximum ratings may not be exceeded under any circumstances, not even momentarily or individually, as permanent damage to the module may result. Symbol Parameter Condition Min. 9 VDD_IN Power Supply Voltage VDD_IO I/O Power Supply Voltage Max. 1.7 4.8 V 1.62 1.92 V High-Level Input Voltage Default 0.65 x VDD_IO VDD_IO V VIL Low-Level Input Voltage Default 0 0.
PAN1326C2 Bluetooth Module 4 Specification No. Characteristics Min. Typ. Max. Min. 25 °C 25 °C 25 °C -40 °C 4 Current consumption during transmit DH5 full throughput 4.5 Typ. Max. Min. Typ. Max. Unit -40 °C -40 °C +85 °C +85 °C +85 °C 40 mA nSHUTD Requirements Symbol Parameter Min. VIH Operation Mode Level 12 Max. Unit 1.42 1.98 Shutdown Mode Level 0 0.4 Minimum Time for nSHUT_DOWN Low to Reset the Device 5 V V VIL Tr/Tf 4.
PAN1326C2 Bluetooth Module 4 Specification 4.7 Bluetooth Bluetooth Receiver – In-Band Signals Characteristics Condition Min. Operation frequency range 2 402 Channel spacing Sensitivity, Dirty Tx on13 -91 dBm π/4-DQPSK, BER=0.01 % -91 8DPSK, BER=0.01 % -84 1E–6 1E–6 Maximum usable input power GFSK, BER=0.1 % Image=–1 MHz 1E–7 dBm -5 π/4-DQPSK, BER=0.1 % -10 8DPSK, BER=0.1 % -10 Level of interferers (for n=3, 4, and 5) -36 -30 dBm GFSK, cochannel dB π/4-DQPSK 9.5 11 16.
PAN1326C2 Bluetooth Module 4 Specification Bluetooth Receiver – General Blocking Characteristics Condition Blocking performance over full range, according to Bluetooth 30 to 2 000 -6 MHz 2 000 to 2 399 -6 MHz 2 484 to 3 000 -6 MHz 3 to 12.75 -6 GHz specification15 Min. Typ. Unit Bluetooth Transmitter – GFSK Characteristics Min. Maximum RF output power16 Typ. Max Unit VDD_IN=VBAT 8 10 VDD_IN=external regulator to 1.
PAN1326C2 Bluetooth Module 4 Specification Bluetooth Modulation – GFSK Characteristics F1 avg Condition Min. –20 dB bandwidth GFSK Modulation characteristics Δf1avg Mod data=4 1 s, 4 0 s: 111100001111... Δf2max ≥ limit for at Mod data=1010101... F2 max Typ. Max. Unit kHz 925 kHz 165 kHz least 99.
PAN1326C2 Bluetooth Module 4 Specification Bluetooth low energy Receiver—General Blocking Characteristics Condition Blocking performance over full 30 to 2 000 MHz –15 range, according to Bluetooth 2 000 to 2 399 MHz –15 2 484 to 3 000 MHz –15 3 to 12.75 GHz –15 low energy specification20 Min. Typ. Max. Unit dBm Bluetooth low energy Transmitter Characteristics Min. RF output power Typ. Max. Unit VDD_IN=VBAT 8 10 VDD_IN=External regulator to 1.
PAN1326C2 Bluetooth Module 4 Specification No. Parameter 4 Average Power: Ch39 Min. 4 5 Peak Power: Ch39 6 Average Power: Ch78 4 7 Peak Power: Ch78 Typ. Max. Unit 11,3 20 dBm 11,6 23 dBm 11,3 20 dBm 11,5 23 dBm 8 Max. Frequency Tolerance: Ch0 -75 -2.6 75 kHz 9 Max. Frequency Tolerance: Ch39 -75 -2.2 75 kHz 10 Max. Frequency Tolerance: Ch78 -75 -2.1 75 kHz 11 Max. Drift: Ch0_DH1 -25 3.6 25 kHz 12 Max. Drift: Ch0_DH3 -40 3.7 40 kHz 13 Max.
PAN1326C2 Bluetooth Module 4 Specification No. Parameter Typ. Max. Unit 47 f(H)-f(L): Ch39 918.3 1 000 kHz 48 f(H)-f(L): Ch78 918.2 1 000 kHz 49 ACPower -3: Ch3 -51.5 -40 dBm 50 ACPower -2: Ch3 -50.4 -40 dBm 51 ACPower -1: Ch3 -18.5 52 ACPower Center: Ch3 Min. 4 6,8 dBm 20 dBm 53 ACPower +1: Ch3 -19.2 54 ACPower +2: Ch3 -50.7 -40 dBm 55 ACPower +3: Ch3 -53.3 -40 dBm 56 ACPower -3: Ch39 -51.6 -40 dBm 57 ACPower -2: Ch39 -50.7 -40 dBm 58 ACPower -1: Ch39 -19.
PAN1326C2 Bluetooth Module 4 Specification No. Parameter Min. Typ. Max. Unit 83 omega o + omega i 2-DH5: Ch39 -75 -6.1 75 kHz 84 omega o 2-DH5: Ch39 -10 -1.4 10 kHz 85 DEVM RMS 2-DH5: Ch39 0.0 0.2 % 86 DEVM Peak 2-DH5: Ch39 0.1 0.35 % 87 DEVM 99 % 2-DH5: Ch39 99 100.0 88 omega i 3-DH5: Ch39 -75 -3.8 75 kHz 89 omega o + omega i 3-DH5: Ch39 -75 -5.9 75 kHz 90 omega o 3-DH5: Ch39 -10 -2.6 10 kHz 91 DEVM RMS 3-DH5: Ch39 0.0 0.13 % 92 DEVM Peak 3-DH5: Ch39 0.
PAN1326C2 Bluetooth Module 4 Specification 4.8 Reliability Tests The measurement should be done after the test device has been exposed to room temperature and humidity for one hour. No. Item 1 Vibration test Limit Condition Electrical parameter should be in specification Freq.: 10~50 Hz; Amplitude: 1.5 mm; 20 min./cycle, 1 hrs. each of XYZ axis Freq.: 30~100 Hz, 6 G; 20min./cycle, 1 hrs. each of XYZ axis 4.
PAN1326C2 Bluetooth Module 5 Cautions 5 Cautions Failure to follow the guidelines set forth in this document may result in degrading of the product’s functions and damage to the product. 5.1 Design Notes 1. Follow the conditions written in this specification, especially the control signals of this module. 2. The supply voltage must be free of AC ripple voltage (for example from a battery or a low noise regulator output).
PAN1326C2 Bluetooth Module 5 Cautions 5.3 Usage Condition Notes 1. Take measures to protect the unit against static electricity. If pulses or other transient loads (a large load applied in a short time) are applied to the products, check and evaluate their operation befor assembly on the final products. 2. Do not use dropped products. 3. Do not touch, damage or soil the pins. 4. Follow the recommended condition ratings about the power supply applied to this product. 5.
PAN1326C2 Bluetooth Module 5 Cautions 1. Ensure the safety of the whole system by installing a protection circuit and a protection device. 2. Ensure the safety of the whole system by installing a redundant circuit or another system to prevent a single fault causing an unsafe status. 5.6 Other Cautions 1. Do not use the products for other purposes than those listed. 2.
PAN1326C2 Bluetooth Module 5 Cautions 5.7 5.7.
PAN1326C2 Bluetooth Module 6 Regulatory and Certification Information 6 Regulatory and Certification Information 6.1 6.1.1 Federal Communications Commission (FCC) for US FCC Notice The PAN1326C2, including the ceramic antenna and the antennas, which are listed in 6.1.5 Approved Antenna List, complies with Part 15 of the FCC Rules. The device meets the requirements for modular transmitter approval as detailed in FCC public Notice DA00-1407.
PAN1326C2 Bluetooth Module 6 Regulatory and Certification Information It is recommended to try to correct the interference by one or more of the following measures: 6.1.3 • • • Reorient or relocate the receiving antenna. • Consult the dealer or an experienced radio/TV technician for help. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
PAN1326C2 Bluetooth Module 6 Regulatory and Certification Information 6.1.6 RF Exposure To comply with FCC RF Exposure requirements, the OEM must ensure that only antennas from the Approved Antenna List are installed 6.1.5 Approved Antenna List. The preceding statement must be included as a caution statement in manuals for products operating with the approved antennas in the previous table to alert users on FCC RF Exposure compliance.
PAN1326C2 Bluetooth Module 6 Regulatory and Certification Information Section Topic and comment 2.7 Antennas Please refer to Section 6.1.4 Antenna Warning and 6.1.5 Approved Antenna List for information about the antenna configuration. 2.8 Label and compliance information Please refer to Section 6.1.3 Label Requirements for guidance regarding the required labeling. 2.9 Information on test modes and additional testing requirements Please study the Design Guide for the PAN1326C carefully.
PAN1326C2 Bluetooth Module 6 Regulatory and Certification Information Ce produit a été développé pour fonctionner spécifiquement avec les antennes listées dans le tableau 6.1.5 Approved Antenna List, présentant un gain maximum de 1.6 dBi. Des antennes autres que celles listées ici, ou présentant un gain supérieur à 1.6 dBi ne doivent en aucune circonstance être utilises en combinaison avec ce produit. L’impédance des antennes compatibles est 50 Ω.
PAN1326C2 Bluetooth Module 6 Regulatory and Certification Information 6.2.2 Labeling Requirements English Labeling Requirements The OEM must ensure that IC labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic IC identifier for this product as well as the IC Notice above. The IC identifiers are: IC: 216Q-1326C2 (for M/N: ENW89823A5KF) These IC identifiers are valid for all PAN1326C2 modules 7.
PAN1326C2 Bluetooth Module 6 Regulatory and Certification Information 6.3 European Conformity According to RED (2014/53/EU) All modules described in this Product Specification comply with the standards according to the following LVD (2014/35/EU), EMC-D (2014/30/EU) together with RED (2014/53/EU) articles: 3.1a Safety/Health: EN 62368-1:2014 EN 62311:2008 3.1b EMC: EN 301 489-1 V2.1.1:2017-02 EN 301 489-17 V3.1.1:2017-02 3.2 Radio: EN 300 328 V2.1.1:2016-11 EN 301 893 V2.1.1:2017-04 EN 300 440 V2.
PAN1326C2 Bluetooth Module 6 Regulatory and Certification Information 6.4 Bluetooth The final Bluetooth end product listing needs to be created by using the following IDs: Declaration ID QDID Panasonic Module (PAN1326C2) Bluetooth 4.2 Controller Subsystem D046132 126665 TI Bluetooth 4.
PAN1326C2 Bluetooth Module 7 Appendix 7 Appendix 7.1 Ordering Information Variants and Versions Order Number Brand Name Description MOQ 21 22 ENW89823A5KF 21 22 PAN1326C2 Bluetooth Basic Data Rate and Low Energy Module with antenna 1 500 Abbreviation for Minimum Order Quantity (MOQ). The default MOQ for mass production is 1 500 pieces, fewer only on customer demand. Samples for evaluation can be delivered at any quantity via the distribution channels.
PAN1326C2 Bluetooth Module 7 Appendix 7.2 7.2.1 Contact Details Contact Us Please contact your local Panasonic Sales office for details on additional product options and services: For Panasonic Sales assistance in the EU, visit https://eu.industrial.panasonic.com/about-us/contact-us Email: wireless@eu.panasonic.com For Panasonic Sales assistance in North America, visit the Panasonic “Sales & Support” website to find assistance near you at https://na.industrial.panasonic.
