Product Specs

 PAN1762 Bluetooth Module
6 Regulatory and Certification Information
Product Specification Rev. 1.1 Page 27
6.1.3 Label Requirements
The OEM must ensure that FCC labelling requirements are met. This includes
a clearly visible label on the outside of the OEM enclosure specifying the
appropriate Panasonic FCC identifier for this product as well as the FCC
Notice above.
The FCC identifier is FCC ID: T7V1762.
This FCC identifier is valid for the PAN1762. The end product must in any case be labelled on
the exterior with:
"Contains FCC ID: T7V1762"
6.1.4 Antenna Warning
This antenna warning refers to the test device with the model number PAN1762
 7.1 Ordering Information
The device is tested with a standard SMA connector and with the antenna listed below. When
integrated into the OEM’s product, these fixed antennas require installation preventing end
users from replacing them with non-approved antennas. Any antenna not in the following table
must be tested to comply with FCC Section 15.203 for unique antenna connectors and with
Section 15.247 for emissions. The FCC identifier for the device with the antenna listed in
 6.1.5 Approved Antenna List is the same (FCC ID: T7V1762).
6.1.5 Approved Antenna List
Item
Part Number
Manufacturer
Frequency Band
Type
Max. Gain
(dBi)
1
ANT016008LCS2442MA1
TDK
2.4 GHz
Chip antenna
1.6