Operator's Manual
Table Of Contents
- What is new in publication version 7.2?
- 1 Introduction
- 1.1 Before you start
- 1.2 Important safety instructions and additional information
- Important information regarding safety
- Disposal of the system
- Product safety
- General care
- Accessory box
- Meter
- Power off meter
- Automatic power-off
- Shut down meter
- Automatic shutdown
- Battery Pack
- Touchscreen
- Electromagnetic compatibility (EMC)
- Electrostatic discharge (ESD)
- Wireless connectivity
- Radiofrequency radiation exposure information
- Local Area Network: protection from unauthorized access
- Wired network connection
- 1.3 System components
- 1.4 Overview of the meter
- 1.5 Overview of the code key reader
- 1.6 Overview of the Accu-Chek Inform II Base Unit
- 1.7 Overview of the Accu-Chek Inform II Base Unit Hub
- 1.8 Overview of the accessory box
- 1.9 Reagents and consumables
- 1.10 Instructions for initial setup
- 2 Powering Up and Entering an Operator ID
- 3 Patient Glucose Testing
- 3.1 Information regarding blood glucose testing
- 3.2 Performing a patient glucose test
- Overview of test procedure
- Entering or selecting the patient ID
- Entering the patient ID manually
- Selecting the patient ID from a list
- Entering a patient ID with barcode scanner
- Confirming or selecting the test strip lot
- Patient identification information
- Inserting test strips
- Obtaining a blood sample
- Applying a blood sample
- Results screen
- Adding comments
- Add barcode content to a result
- Additional Patient Test
- 4 Glucose Control Testing
- 5 Review Results
- 6 Storing Test Strip, Control Solution, and Linearity Solution Information in the Meter
- 7 Linearity Testing
- 8 Proficiency Testing
- 9 Initial Startup
- 9.1 Connecting the base unit
- 9.2 Installing or replacing the battery pack
- 9.3 Docking the meter
- 9.4 Initial setup on the meter
- 9.5 Opening the Setup Menu
- 9.6 Date and time format
- 9.7 Display options and optional tests
- 9.8 Options for test strips
- 9.9 Options for glucose control tests
- 9.10 Value ranges (normal, critical, reportable)
- 9.11 Options for Operator ID Entry
- 9.12 Patient ID options
- 9.13 Creating a setup password
- 9.14 Setting the date and time
- 9.15 Beeper options
- 10 Maintenance and Care
- 11 Troubleshooting
- 12 General Product Information
- A Appendix
- B Appendix
- C Supplement for Other Test Entry
- D Supplement for Observed Test Sequence
- E Supplement for Enhanced Workflows
- F Appendix for Accu-Chek Inform II Base Unit (legacy version)
- G Limited Warranty
- Index
188
08424705001 (04) 2021-06 USA • Accu-Chek Inform II Operator’s Manual Version 7.2
12.2 Further Information
Ordering
Item Description REF/Catalog
Number
Accu-Chek Inform II Meter Meter, equipped with built-in WLAN functionality 05060303001
Accu-Chek Inform II Battery Pack Rechargeable battery pack (for meters with
serial no. above UU14000000)
06869904001
Accu-Chek Inform II
Battery Compartment Cover
Replacement cover for meter battery
compartment (for meters with serial no. above
UU14000000)
06869823001
Accu-Chek Inform II Base Unit (NEW) Equipped with charging and connectivity
functionality
07671717190
Accu-Chek Inform II Base Unit Light
(NEW)
Equipped with charging functionality 08376824190
Power Supply* Power supply (international edition) for
Base Unit Light (NEW) REF 08376824190/
Base Unit (NEW) REF 07671717190
08692432001
Power Supply
*
Power supply (North America) for
Base Unit Light (NEW) REF 08376824190/
Base Unit (NEW) REF 07671717190
08692432160
* Important note
Power supply REF 07006098001, (International edition) and Power supply REF 07455976190,
(North America), Type: FW7555M/12, Input: 100-240V/50-60Hz/350-150 mA, Output: have
been discontinued and replaced by:
Power supply REF 08692432001, (International edition) and Power supply REF 08692432160,
(North America), Type: FW8001M/12, Input: 100-240V/50-60Hz/400-150 mA, Output:
The change in power supply has no effect on product performance. Type: FW7555M/12 and Type:
FW8001M/12 can be used in parallel.
12V 1.25A
12V 1.50
A