Integration Guide


PAN9028 Bluetooth/Wi-Fi Module 8 Regulatory and Certification Information
Module Integration Guide Rev. 1.0 Page 28 of 34
8.1.5 Approved Antenna List
Item
Part Number
Manufacturer
Type
Polarization
Frequency Band
Gain (dBi)
1
ANT162442DT-
2001A2
TDK
Chip
antenna
Linear
2.400 GHz to
2.484 GHz
2.1
5.150 GHz to
5.850 GHz
1.5
2
X9001091-
W3DRMW
2016693-x
Kyocera AVX
TE
Connectivity
Dipole
antenna
assembly
Linear
2.400 GHz to
2.485 GHz
1.8
5.150 GHz to
5.850 GHz
2.9
3
X9001091-
W3DRMB
2016693-x
Kyocera AVX
TE
Connectivity
Dipole
antenna
assembly
Linear
2.400 GHz to
2.485 GHz
1.8
5.150 GHz to
5.850 GHz
2.9
8.1.6 RF Exposure
To comply with FCC RF Exposure requirements, the OEM must ensure that
only antennas are installed which are listed in  8.1.5 Approved Antenna List.
The preceding statement must be included as a “CAUTION” statement in
manuals for products operating with the approved antennas to alert users on
FCC RF Exposure compliance.
Any notification to the end user of installation or removal instructions about the
integrated radio module is not allowed.
The radiated output power of the PAN9028 with a mounted ceramic antenna
(FCC ID: T7V9028 for model ENWF9408A1EF and model ENWF9408A2EF)
are fulfilled for mobile configuration. The installation of the module is restricted
to mobile host devices. The PAN9028 shall be used in such a manner that the
potential for human contact during normal operation is minimized.
End users may not be provided with the module installation instructions.
OEM integrators and end users must be provided with transmitter operating
conditions for satisfying RF exposure compliance.