Integration Guide


PAN9028 Bluetooth/Wi-Fi Module 8 Regulatory and Certification Information
Module Integration Guide Rev. 1.0 Page 29 of 34
8.2 Innovation, Science, and Economic Development (ISED) for
Canada
The following IC rules have to be followed by end product OEM’s:
English
The PAN9028 and versions are licensed to meet the regulatory requirements of ISED.
License ID: IC: 216Q-9028
HVIN: ENWF9408A1EF
ENWF9408A2EF
Manufacturers of mobile, fixed or portable devices incorporating this module are advised to
clarify any regulatory questions and ensure compliance for SAR and/or RF exposure limits.
Users can obtain Canadian information on RF exposure and compliance from www.ic.gc.ca.
This device has been designed to operate with the antennas listed in  8.1.5 Approved
Antenna List, having a maximum gain of 2.1 dBi (for 2.4 GHz) and 2.9 dBi (for 5 GHz). Antennas
not included in this list or having a gain greater than 2.1 dBi (for 2.4 GHz) and 2.9 dBi (for
5 GHz) are strictly prohibited for use with this device. The required antenna impedance is 50 Ω.
The antenna used for this transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
Due to the model size, the IC identifier is displayed in the installation instruction and on the
package label only. It cannot be displayed readable on the module’s label due to the limited
size.
The end customer has to assure that the device has a distance of more than
20 cm from the human body under all circumstances.
If the end customer application intends to use the PAN9028 in a distance
smaller 20 cm from the human body, SAR evaluation has to be repeated by
the OEM.
The end customer equipment must meet the actual Safety/Health
requirements according to ISED.