Integration Guide


PAN9028 Wi-Fi/Bluetooth Module 10 Regulatory and Certi
Module Integration Guide Rev. 1.0 Page 30 of 45
10.1.5 Approved Antenna List
Item Part Number Manufacturer Type Polarization Frequency Band Gain (dBi)
1 ANT162442DT-
2001A2
TDK Chip
Antenna
Linear 2.400 - 2.484 GHz 2.1
5.150 - 5.850 GHz 1.5
10.1.6 RF Exposure
To comply with FCC RF Exposure requirements, the OEM must ensure that
only antennas from the Approved Antenna List are installed  10.1.5 Approved
Antenna List.
The preceding statement must be included as a caution statement in manuals
for products operating with the approved antennas in the previous table to alert
users on FCC RF Exposure compliance.
Any notification to the end user of installation or removal instructions about the
integrated radio module is not allowed.
The radiated output power of the PAN9028
with a mounted ceramic chip antenna
(FCC ID: T7V9028 for model ENWF9408A1EF and ENWF9408A2EF)
are fulfilled
for mobile configuration. The installation of the module is restricted to mobile host
devices. The PAN9028 shall be used in such a manner that the potential for
human contact during normal operation is minimized.
End users may not be provided with the module installation instructions.
OEM integrators and end users must be provided with transmitter operating
conditions for satisfying RF exposure compliance.
10.1.7 Integration Instructions
This chapter gives integration instructions for host product manufacturers according to KDB
996369 D03 OEM Manual v01.
Section Topic and Comment
2.2 List of applicable FCC rules
47 CFR Section Part 15C
Frequency Band (MHz) 2 400 to 2 483.5
Systems Digital Transmission Systems operating within the 2 400 - 2 483.5
MHz Band
Reference / Requirement 15.247(a)(2), 15.247(b)(1), 15.207, 15.247(d), 15.247(e)
Complied Module M/N ENWF9408A1EF, ENWF9408A2EF