Sell Sheet

www.panamax.com
www.furmansound.com
BlueBOLT
®
not only allows installers to control their customers systems through the cloud but the M4315-PRO also
allows local system control. It’s simple to use!
Front Panel Reboot Buttons
REBOOT 1 & 2: Each button is discrete. Press & hold either button for
two seconds to initiate a “reboot” sequence of Outlet #1 or #2 (default
Prole 1). Press & hold both buttons for two seconds (called the Green
Button) to initiate a full power-up or shutdown sequence. This can be used
for customers going on vacation, who do not wish to access BlueBOLT® to
power their unit down, while still leaving the system controllable. The front
panel outlet is always on, unless the circuit breaker is switched to OFF
(which also disallows any control). Refer to the custom sequencing section
for changing these reboot and startup/shutdown timings.
Custom Sequencing Proles
The M4315-PRO has four, start up or shutdown, preset proles to choose
from via the front panel interface. Prole 1 is the default prole (P1).
One personal prole (PP) may be custom programmed via telnet. Using
this custom sequencing ability, the programmer can set a personal prole
(PP) of outlet timings using any of the four mentioned triggers: (1st - 12V),
(2nd - Reboot 1), (3rd - Reboot 2), or 4th (Green Button). This is vital for
larger custom systems, commercial applications, or control systems.
Rear Panel 12V Trigger Input
The 12V trigger input can switch on pair of outlets (default Prole 1)
or initiate an on/off sequence depending on the conguration. It func-
tions as an input trigger (to be controlled) 3.5mm mono tip-ring ± (5-24
VDC).
Command Line Telnet
Interfacing
All of our BlueBOLT
®
prod-
ucts can utilize the power of
simple to use hosted-remote
access, while allowing simul-
taneous local control via an
automation system or com-
puter with a telnet protocol or
TCP/IP. Port 23 is also open
by default.
ADVANCED CONTROL FOR
M4315-PRO
Power conditioners and surge protectors
typically don’t get much fanfare, but when you
combine top of the line Linear Noise Filtration, Automatic Voltage
Monitoring and catastrophic surge protection (Protect or Disconnect™) into such
an advanced power controller, it really becomes the most important component in the rack.
ADVANCED LOCAL CONTROL