User's Manual
Table Of Contents
CANCELLING THE REPEAT MODES:
Press the REPEAT BUTTON (#4) again or until all the icons on the LCD DISPLAY (#8)
turn off.
Skip and Search Mode (Commercial CD and CD MP3)
1. During Play or Pause mode, tap the the
/TUN - / /TUN + BUTTONS (#13) to
go back to the beginning of the current track or go to the next track.
2. During Play mode or Pause mode, press and hold the /TUN - / /TUN +
BUTTONS (#13) to search within the current track at high speed playback.
3. Tap the FOLDER + / + 10 BUTTON (#10) allows you to switch to next tenth track.
4. During CD MP3 Play or Pause mode, press and hold the FOLDER + / + 10
BUTTON (#10), to go to the next folder (if available on your CD MP3).
Program Play Mode (Commercial CD and CD MP3)
This function allows music tracks to be played in a programmed sequence.
NOTE: Program can only be set in STOP mode.
1. Tap the PROG/MEM BUTTON (#4) once. The program number “P01” will show on
the LCD DISPLAY (#8) and the “PROG” icon will blink.
2. Press the /TUN - / /TUN + BUTTONS (#13) to select the track to be
programmed. The selected track and the “PROG” icon will blink.
3. Press the PROG/MEM BUTTON (#4) again to store the selection. The program
number will advance to P02 and the PROG icon will blink to prompt for the next
input.
4. You may repeat steps 2 to 3 to program up to 20 tracks. Once the storage capacity
has been reached, “FUL” will show on the LCD DISPLAY (#8).
5. Press the BUTTON (#12) to start program play. The PROG icon will light
steadily on the LCD DISPLAY (#8). The LCD DISPLAY (#8) will show the current
folder number (CD MP3 only) followed by track number of the disc and then the
track time.
6. You may repeat the current programmed track or all programmed tracks by
pressing the REPEAT BUTTON
(#4) repeatedly to select repeat 1 or repeat all at
programmed play mode
7. Press the BUTTON (#12) again to pause the playback while retaining the
program.
8. To play the program back again, press the BUTTON (#12).
9. To delete the program, press the
BUTTON (#3) twice. The PROG icon will turn
off on the LCD DISPLAY (#8).
NOTES:
• If skipping occurs during CD playback, try turning the volume down.
• Do not open the CD DOOR when a CD is playing.
E-10