User's Manual

CANCELLING THE REPEAT MODES:
Press the REPEAT BUTTON (#4) again or until all the icons on the LCD DISPLAY (#8)
turn off.
Program Play Mode
This function allows music tracks to be played in a programmed sequence.
NOTE: Program can only be set in STOP mode.
1. Tap the PROG/MEM BUTTON (#4) once. The program number P01 and the
“PROG” icon will light on the LCD DISPLAY (#8).
2. Press the /TUN - / /TUN + BUTTONS (#13) to select the track to be
programmed. The selected track number will blink on the LCD DISPLAY (#8).
3. Press the PROG/MEM BUTTON (#4) again to store the selection. The program
number will advance to P02.
4. You may repeat steps 2 to 3 to program up to 20 tracks. Once the storage capacity
has been reached, FUL will blink on the LCD DISPLAY (#8).
5. Press the BUTTON (#12) to start program play. The PROG icon will light
steadily on the LCD DISPLAY (#8). The LCD DISPLAY (#8) will show the current
folder number (if available) followed by track number of the USB device and then
the track time.
6. You may repeat the current programmed track or all programmed tracks by
pressing the REPEAT BUTTON
(#4) repeatedly to select repeat 1 or repeat all at
programmed play mode
7. Press the BUTTON (#12) again to pause the playback while retaining the
program.
8. To play the program back again, press the BUTTON (#12).
9. To delete the program, press the
 BUTTON (#3) twice. The PROG icon will turn
off on the LCD DISPLAY (#8).
Recording (Encoding to MP3)
The unit support recording(encoding to MP3) from sources Bluetooth/CD/FM
Radio/AUX IN.
1. Tap the
/ SOURCE BUTTON (#9) to turn the unit on.
2. Repeatedly tap the
/ SOURCE BUTTON (#9) to select the source you want to
record.
3. Insert the USB device into the USB PORT (#5).
4. Start to play the selected source.
5. Tap the REC BUTTON (#6) to start the recording. The REC icon will show on the
LCD DISPLAY (#8) and blink.
6. Tap the REC BUTTON (#6) again to stop the recording. The REC icon will turn off.
7. After the recording, repeatedly tap the
/ SOURCE BUTTON (#9) to select USB
mode. The unit will start to replay the record immediately.
Notes:
•
The recording is stored in the folder named REC in the USB device.
•
Once the REC BUTTON (#6) is pressed, the recording process will continue
recording until the REC BUTTON (#6) is pressed again or until the memory storage
device is full.
•
The recording format is preset to MP3 (128 kbps/ 32khz) and cannot be changed
E-13