User Manual
Table Of Contents
- Introduction
- At a glance
- System settings
- Telephone
- Vehicle equipment
- General notes
- Using the telephone via the Bluetooth® interface
- Convenience telephony
- Switching between Bluetooth® and convenience telephony
- Reception and transmission volume
- Telephone operation
- Using the telephone book
- Using call lists
- Text messages (convenience telephony)
- Mercedes-Benz Contact
- Audio
- Rear Seat Entertainment System
- Vehicle equipment
- General information
- Basic functions
- System settings
- Audio CD/DVD and MP3 mode
- DVD video mode
- Important safety notes
- Notes on discs
- DVD playback conditions
- Function restrictions
- Inserting and removing DVDs
- Activating video DVD mode
- Hiding/showing the navigation menu
- Showing/hiding the menu
- Fast forward/rewind
- Pause function
- Stop function
- Selecting a scene/chapter
- Selecting a film/track
- Picture settings
- DVD menu
- Setting the language and audio format
- Subtitles and camera angle
- Interactive content
- AUX mode
- Internet
- Editorial office
i
Only permissible numbers for the fre-
quency range
can be entered in front of the
decimal point. If non-permissible numbers
are entered after the decimal point, the
next lowest frequency is set.
X
Using the number pad enter "1046".
The station selected is played.
Basic functions of Audio 20
Switching Audio 20 on/off
Overview
:
q button
;
Thumbwheel
Switching Audio 20 on
X
Press the q button.
or
X
Open the display cover.
or
X
If Audio 20 was on the last time the ignition
was switched off, turn the ignition key to
position 2 in the ignition lock.
The last main function used is reactivated
after switching on.
Switching Audio 20 off
X
Press the q button.
or
X
Turn the key to position 0 in the ignition
lock.
i
If you switch off Audio 20, playback of the
current audio source will also be switched
off. Your mobile phone can no longer be
operated via the audio system.
Mute
Switching the audio source on/off
X
Press the 8 button.
The sound from the audio source is
switched on or off.
i
If the
sound is muted, the 8 symbol is
shown in the status bar. You will still hear
traffic announcements even if the sound is
muted.
If you change the audio source or adjust the
volume using the thumbwheel, the sound is
automatically switched on.
Switching off Traffic Programme
X
Press and hold the 8 button until
the . message disappears from the sta-
tus bar in the display.
or
X
Select óQRadioQTraffic
announcements.
The tick next to Traffic announcements
disappears.
i
The announcements remain muted even
if Audio 20 is switched off and on again.
Basic functions of Audio 20
19
At a glance
ZA audio 20 NTG4.0 BR204 ECE ÄJ 2010/1a; 1; 2, en-GB
sabbaeu Version: 3.0.2.13
2010-02-09T14:34:57+01:00 - Seite 19