User Manual

Digital stations are selected (Y page 47)
and stored (Y page 48) in the same way as
analogue stations. The following section
therefore lists
only those features specific to
DAB.
Switching wavebands
You can switch the radio between the FM,
MW, SW, LW and DAB wavebands.
Waveband Frequency
FM (VHF) 87.5 – 108.0 Mhz
MW (medium wave) 531 – 1620 kHz
SW (short wave) 5800 – 6250 kHz
LW (long wave) 153 – 282 kHz
X
Press the ó button
as often as necessary.
i
In
the
MW, SW and LW wavebands, Audio
20 shows the station frequency, instead of
the station name.
Searching for an ensemble (DAB radio
mode)
Ensembles are bundled radio stations availa-
ble in one reception area. It is possible to
select individual stations from the ensemble.
X
Select DABQ<< or >>.
The system searches for the ensemble. If
no ensemble can be found, the No new
ensemble found message appears in the
display.
Selecting a station
Selecting a station from the station list
i
The station
list is only available in the FM
and DAB wavebands. The list contains all
stations with adequate reception and is
constantly updated. For FM stations with-
out an RDS service, the list shows the fre-
quency instead of the name.
X
Press the ó button once or several times
until the FM
waveband appears in the status
bar.
X
Slide XVY or turn cVd
when the main area
is selected.
or
X
Press the E or F button.
or
X
Press a number key on the telephone key-
pad (when the station is stored).
or
X
Select RadioQStation list.
The station list appears.
The # dot in front of a list entry indicates the
station currently selected. A number in front
of the list entry indicates the preset position
in the station preset memory.
X
Select station.
Selecting a station using the station
search function
i
The station search function is only avail-
able in the MW, LW and SW wavebands.
Radio mode and DAB radio mode
47
Audio
ZA audio 20 NTG4.0 BR204 ECE ÄJ 2010/1a; 1; 2, en-GB
sabbaeu Version: 3.0.2.13
2010-02-09T14:34:57+01:00 - Seite 47