User's Manual
Table Of Contents
- Table of Contents
- 1 Camera Monitoring
- 1.1 Accessing the Camera
- 1.2 Viewing Live Camera Images
- 1.2.1 Using the Operation Bar
- 1.2.2 Aiming the Camera Lens
- 1.2.3 Limiting the Pan/Tilt Range
- 1.2.4 Registering and Changing Presets
- 1.2.5 Zooming
- 1.2.6 Backlight Correction
- 1.2.7 White Balance
- 1.2.8 Video Images and Image Refresh Rate
- 1.2.9 Taking Snapshots
- 1.2.10 Audio Features
- 1.2.11 Additional Features Available While Viewing Live Camera Images
- 1.3 Viewing Multiple Camera Images
- 1.4 Maximum Number of Viewing Sessions
- 1.5 Maximum Number of Viewing Sessions in Wireless Mode (BL-C230 Only)
- 2 Using Triggers to Buffer and Transfer Images
- 2.1 Configuring a Timer Trigger
- 2.2 Configuring a Sensor, Alarm, or Detection Trigger
- 2.3 Disabling and Enabling a Trigger
- 2.4 Configuring the Camera to Transfer Images
- 2.5 Configuring the Camera to Send Trigger Notifications
- 2.6 Viewing Buffered Images
- 2.7 Deleting Buffered Images Manually
- 2.8 Understanding How the Camera Manages Buffered Images
- 2.9 Adjusting Sensor Sensitivity
- 2.10 Adjusting Motion Detection Sensitivity
- 2.11 Adjusting Sound Detection Sensitivity
- 2.12 Sending Alarm Log Information
- 3 Mobile Phone Features
- 4 Configuring the Camera for Access from the Internet
- 5 Changing Camera Settings
- 6 User Accounts
- 7 Advanced Settings
- 8 Camera Administration and Maintenance
- 8.1 Confirming Camera Status
- 8.2 Confirming Wireless Status (BL-C230 Only)
- 8.3 Confirming Session Status
- 8.4 Confirming Alarm Logs
- 8.5 Restarting the Camera
- 8.6 Updating the Camera’s Firmware
- 8.7 Saving Settings in a Configuration File
- 8.8 Restoring Settings from a Configuration File
- 8.9 Resetting the Camera
- 9 The [Support] Tab
- 10 Using IPv6
- 11 PC Settings
- 12 Using the Setup Program
- 13 Technical Information
