Installation Manual Additional Digital Cordless Handset Model No. KX-PRXA10 Thank you for purchasing a Panasonic product. This unit is an additional handset compatible with the following series of Panasonic Digital Cordless Phone: - KX-PRX120 (KX-PRXA10) (The corresponding models are subject to change without notice.) You must register this handset with your base unit before it can be used. This document describes only the steps needed to register and begin using the handset.
Installation Supplied accessories Accessory item/Order number Quantity Charger/PNLC1049ZW 1 AC adaptor/PNLV226KZ 1 Rechargeable battery/KX-PRA10EX 1 Handset cover*1/M81101016740 1 *1 The handset cover comes attached to the handset. Note: R Please read the base unit’s documentation for additional/replacement accessories. Preparing the charger n KX-PRXA10 A Insert the AC adaptor plug to the unit until you hear a click. B B Connect the AC adaptor to the power outlet.
Installation R When removing the battery, make sure you turn off the handset first. R To avoid loss of data or malfunction, do not damage, carelessly handle, or short-circuit the gold-colored contacts of the microSD card. 1 Remove the handset’s cover. 2 Open the microSD card cover by sliding it toward the nearest side of the handset (A) and then lifting up (B).
Installation Charging the handset Charge the handset for about 5 hours before initial use. The charge indicator (A) lights while the handset is charging and turns off when the handset is fully charged. Important: R If the handset is placed into the charger while talking on the phone, the call is not disconnected. A A or Place the handset into the charger. Connect a USB cable (not supplied) directly to the handset.
Installation For your safety To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth.
Installation Battery R Use only the specified battery or additional/replacement battery noted on page 2 for replacement battery information. R Do not open or mutilate the battery. Released electrolyte from the battery is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed. R Exercise care when handling the battery.
Installation Other information R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Routine care R Wipe the outer surface of the product with a soft moist cloth. R Do not use benzine, thinner, or any abrasive powder.
Installation option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS: 1) Remain on the line and briefly explain to the dispatcher the reason for the call. 2) Perform such activities in the off-peak hours, such as early morning or late evenings.
Installation Notice: R FCC ID can be found inside the battery compartment or on the bottom of the unit. Notice: LThis product is designed for use in the United States of America. Sale or use of this product in other countries may violate local laws. LCet appareil est conçu pour être utilisé aux États-Unis d’Amérique. La vente ou l’emploi de cet appareil dans certains autres pays peut constituer une infraction à la législation locale.
Installation in part, except as expressly provided in this agreement, C export the software in contravention of any applicable U.S. or foreign export laws and regulations. Open source software notice Parts of this product use open source software supplied based on the relevant conditions of the Free Software Foundation’s GPL and/or LGPL and other conditions. Please read all license information and copyright notices related to the open source software used by this product.
Appendix Customer services Customer Services Directory (United States and Puerto Rico) Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/help or, contact us via the web at: http://www.panasonic.
Appendix Warranty (For United States and Puerto Rico) Panasonic Telephone Products Limited Warranty Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as "the warrantor") will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“Limited Warranty period"), at its option either (a) repair your product with new or refurbished parts, or (b)
Appendix Limited Warranty Limits And Exclusions This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
Appendix IMPORTANT! If your product is not working properly. . . 1 2 3 4 Reconnect AC adaptor to the base unit. Check if telephone line cord is connected. Reinsert the battery and restart the handset. Read troubleshooting page in the base unit’s Operating Instructions. Visit our Web site: http://www.panasonic.com/help LFAQ and troubleshooting hints are available. Two Riverfront Plaza, Newark, NJ 07102-5490 © Panasonic System Networks Co., Ltd. 2013 14 For assistance, please visit http://www.panasonic.