Center Module Operating Instructions ENGLISH WX-CC411 WX-CC412 FRANÇAIS Model No.
ENGLISH VERSION FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
For U.S.A. WARNING: • This apparatus must be earthed. • Apparatus shall be connected to a main socket outlet with a protective earthing connection. • The mains plug or an appliance coupler shall remain readily operable. • To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, should be placed on the apparatus.
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
(1) Product outline Preface Center Module WX-CC411, WX-CC412 is exclusively designed for Panasonic Wireless Communication System, which is used with drive-thru menu boards, etc. The system operates on 1.9 GHz DECT. Features - Center Module WX-CC411, CC412 provides the central control function to DWCS. - They are used at Drive-Through Restaurants: WX-CC411 for single lane, and WX-CC412 for dual lane. - 1.
Precautions Handle this product with care. The product contains sensitive components that can be damaged by improper handling or storage. Repair or replace any defective components. Use this product for indoor use only. Do not expose this product to direct sunlight for hours and do not install the product near a heater or an air conditioner. Otherwise, it may cause deformation, discoloration and malfunction. Keep this product away from water. Avoid installing in the following locations.
(2) Name and descriptions of each parts and basic screen Appearance (1) LCD Touch Panel a b c (1) 7 inch color touch panel LCD 7 inch color touch panel LCD for operation and display.
(2) Information Button Display the status and configuration (3) Settings button Display the various setting screens. (4) Camera button Display the image on the screen by the network camera that is connected to the center module.
(5) Quick button Display the Quick Control screen to be used in the store operation.
Basic Screen (6) (7) (8) (9) (15) (10) (11) (12) (13) (14) (6) Security alert indicator If you receive an alert signal from the All-in-One Headset or an external device, it is displayed in color. (7) Vehicle Detection indicator (Lane A) When the vehicle came to the position of the menu board, it is displayed in color. (8) Talking indicator (Lane A) Store personnel and customers at lane A during the conversation, it is displayed in color.
Setting Screen (17) (20) (22) (24) (21) (23) (18) (25) (19) (26) (16) (32) (33) (28) (27) (30) (29) (31) (16) Lane mode indication Indication for Lane A or Lane B (17) Lane indication Indication for tandem lane or single lane (18) Nightting volume mode indicator Indication for the status of the speaker volume at night (19) Cross Beep indicator Indication for the status of the cross beep setting (20) Outside Speaker volume level indicator (Lane A) Indication for the sound level (21) Outside Speaker vo
(23) AUX Mic volume level indicator (Lane A) Indication for the sound level (24) Beep sound volume level indicator (Lane A) Indication for the sound level (25) Line input level indicator (Lane A) Indication for the sound level (26) Line output level indicator (Lane A) Indication for the sound level (27) Outside Mic indicator ON/OFF indication (28) Outside Mic indicator ON/OFF indication (29) Talking with customer indicator ON/OFF indication (30) Beep sound indicator ON/OFF indication (31) Talking with greet
Security Alert Screen (36) (35) (37) Display the date and time that the issue of security has occurred (35) F Button/Clear button Clear the alert (36) Alert stop button Stop the beep sound in the Beltpack (WX-CT420) or All-in-One Headset (WX-CH450).
Help Contact Information Screen Indicate the emergency contact information System Information Screen Indication for networking status
Camera monitoring screen (multi) (38) (39) (42) (43) (44) (45) (46) (40) (38) Camera 1 Screen Display the image of Camera 1 (39) Camera 2 Screen Display the image of Camera 2 (40) Camera 3 Screen Display the image of Camera 3 (41) Camera 4 Screen Display the image of Camera 4 (42) Camera 1 Full Screen Button Display on the full screen of camera 1 (43) Camera 1 Full Screen Button Display on the full screen of camera 2 (44) Camera 3 Full Screen Button Display on the full screen of camera 3 (41)
(45) Camera 4 Full Screen Button Display on the full screen of camera 4 (46) 4 screen simultaneous display button Display the image of all cameras Quick Setup menu screen (47) (48) (49) (47) Common button Indicate the Quick Control screen of common Lane (48) Lane A selection button Display on the Lane A Quick Control screen (49) Lane B selection button Display on the Lane B Quick Control screen How to operation on screen The operation by direct touch with a finger
How to basic operation on screen (1) Return button (2) Item selection button (3) Page change button (1) Return button Return to upper level operation screen (2) Item selection button (3) Page change button Finalizing the setting (1) Set button (1) Set button All items on the screen can be set with pressing the button at one time in case of multi items.
Input characters - In case of input characters for passwords or address, use with keyboard.
4. How to operation Basic Operation - Communications with customers (TALK) Store personnel wearing the headset can communicate bidirectionally with any customer who is at the menu board. - In regard to the method of talking, refer to the operating instructions of the Belt Pack (WX-CT420) or the Communications with other Store Personnel (PAGE) Store personnel wearing the headset can communicate with each other without being heard by customers.
Press the SPEED TEAM button of the Center Module. Quick setting screen (common) 1 The Belt Pack or All-in-One Headset allows the operator to hear the voice prompt of the "SPEED TEAM ON". 2 The Belt Pack or All-in-One Headset allows the operator to communicate by pressing the PAGE button. 3 Press the PAGE button, and communication can be performed in the PAGE-LOCK mode. (Even if the PAGE button is set to PTP, it operates by PAGE-LOCK.
DAY mode: When you are taking charge of lane A, if the vehicle detector is on the lane A, you will hear the beep A. If the vehicle detector is on of the lane B, you will not hear the beep B. NIGHT mode: When you are taking charge of lane A, if the vehicle detector is on the lane A, you will hear the beep A. If the vehicle detector is on of the lane B, you will hear the low level beep B. When both vehicle detectors are on, you will alternately hear the beep A and the low level beep B.
Quick setting screen (each lane) NORMAL: The vehicle detector turns on only when a vehicle is detected at the menu board. When the detector turns on, a beep tone is heard in the headset. When the Talk button is pressed on the Belt Pack or All-in-One Headset side, the Outside Speaker and the Outside Microphone are turned ON at the menu board. When the vehicle leaves, the vehicle detector turns off. When setting the normal position, Auto Talk Lock mode is enabled.
System Parts and Accessories ■ Center Module WX-CC411 WX-CC412 ■ All-In-One Headset WX-CH450 ■ Belt Pack WX-CT420 ■ Headset WX-CH427 ■ Wireless Repeater WX-CR470 ■ Battery WX-B3030 (1UF653450R-MDSP) ■ Battery Charger WX-Z3040A
■ Installation procedures Preparations (Refer to page xx.) Installation of center modules on the wall (Refer to page xx.) Wiring to the center modules (Refer to page xx.) ID registration for follower units (Refer to page xx.) [System Setup] Installed System Setting (Refer to page xx.) Adjustments to adequate sound levels ■ Preparations This Center Module is designed to be mounted on a wall via wall bracket.
Fixing 1. Wall bracket and 4 screws (4.1 mm X25 mm) used for fixing. (Required pull-out capacity of a single screw/bolt is 118 N {12 kgf} or more.) 2. Attach the hook part of the body wall bracket (4 places).
3. Make sure that the body is stuck completely through confirmation window [CHECK] If you can visually stamp completely, it is properly installed. Stamp is not visible, or if you are missing, it is not installed correctly. If possible visibility, it is installed correctly. 4. Using the wall fixing clamp the supplied power cord and mounting (25 mm 4.1 mm ×) screws provided.
■ Clamping the Power Plug and Power Cord Important: Surely clamp the power plug to this center module and screw the AC cable to the wall using the provided AC cable clamper. 1 Insert an AC cable holder into the hole under the AC inlet. Slide the holder to the backward by pushing down the clamp lever. 2 Insert the power plug into the power cord inlet. 3 Push the holder forward until the holder touches the power plug.
■ Wiring to the center modules 1 Remove the terminal cover. Slide the front cover downwards by pressing its arrow-marked part and pull the lower side of the cover toward you. 2 Insert a “minus” screwdriver in the slot as illustrated and remove the terminal socket from the main unit. 7 ㎜ 1 ㎜ {9/32 inches 1/16 3 Connect the wiring material to the terminal socket. Use the “minus” screwdriver and loosen the screw located on the upper surface of the terminal socket.
● Refer to the following lists attached on the inside of the terminal cover to make connections. ■ Basic Connection This diagram shows the basic system connection. Order Post Kitchen Mic Microphone Extension Vehicle Detector Vehicle Detector External Device Kitchen SP (8Ω) Drive thru lane PC Kitchen Mic Microphone Kitchen Monitor HUB Speaker (8Ω) Order Post Sensor +Refrigerator +Cashier +etc...
Specifications Operating frequency (TX/RX): 1 920 MHz-1 930 MHz Power supply: 120 V AC, 60 Hz Power consumption: 11 W Outside speaker: 1.25 W, 8 Ω AUX speaker: 1.25 W, 8 Ω Dimensions: 404 mm (W) x 265 mm (H) x 69 mm (D) {15-15/16" (W) x 10-7/16" (H) x 2-3/4" (D)} Weight: 2.3 kg {5.07 lbs.} Ambient operating temperature: –10 °C to +50 °C {14 °F to 122 °F} Dimensions and weighs indicated are approximate. Specifications are subject to change without notice.