User's Manual

11
Operating Procedures
w Preparations
Prior to operating the headset, confirm that the system
setup for the headset, center module, and other devices has
been completed.
 Install a battery in the battery compartment.
(Refer to p. 10 “Battery Loading & Replacement”.)



 Press the [POWER] button to turn on the
power.
p When the power is turned on, the voice messages
“Hello”, “Headset xx” (xx: ID number registered in
the center module) and “Lane x” (x: Connected Lane
number) are heard from the earphone.
 Wear the headset.
 Adjust the head pad so that the earphone is
placed on your ear.
 Rotate and bend the microphone boom so that
the microphone is placed near your mouth.
 Attach a strap if necessary.
Strap
English