User's Manual

8
Installing the Software
1 Turn on or restart the computer.
Press F2 while [Panasonic] boot screen is displayed soon
after the computer begins the startup procedure.
If [Enter Password] is displayed, enter your password.
2 Select the [Advanced] menu and confirm the followings.
( page 12)
The serial port’s setting is optimal.
[On & Off] is selected at [Power SYNC with PC].
If [On & Off] is not set, confirm the power to the GSM/GPRS modem is on.
3 Save the settings and exit the Setup Utility.
4 Input [c:\util\drivers\gprs\setup.exe] in
[Start] - [Run] and select [OK].
Follow the on-screen instructions.
When the message on the right is displayed, select [OK].
5 At [Winmux Driver Setup] screen, select
[Start Scan].
All GSM/GPRS modems installed in the computer will
be listed in [Modem List].