Reference Manual The Reference Manual and the Important Tips can be accessed on your computer. When a printer is connected, the Reference Manual can also be printed. The Reference Manual explains functions for you to make greater use of the computer, such as how to add peripheral devices, how the Setup Utility works, and other useful information. (Refer to the cover of this manual for a list of the main contents included.
List of Error Codes 0200 Failure Fixed Disk Fixed disk in not working or not configured properly. Check to see if fixed disk is attached properly. Run Setup. Find out if the fixed-disk type is correctly identified. 0210 Stuck key Stuck key on keyboard. 0211 Keyboard error Keyboard not working. 0212 Keyboard Controller Failed Keyboard controller failed test. May require replacing keyboard controller. 0213 Keyboard locked - Unlock key switch Unlock the system to proceed.
List of Error Codes Troubleshooting 02F5: DMA Test Failed ServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers. 02F6: Software NMI Failed ServerBIOS2 test error: Cannot generate software NMI (Non-Maskable Interrupt). 02F7: Fail - Safe Timer NMI Failed ServerBIOS2 test error: Fail-Safe Timer takes too long. device address Conflict Address conflict for specified device.
Dealing with Problems (Summary) When a problem occurs, refer to this page. The “Reference Manual” also contains detailed information. If a problem appears to be related to a software application, read the software related manual. If you still cannot troubleshoot the problem, contact Panasonic Technical Support ( page 42). You can use the PC Information Viewer to check the computer's usage status.
Dealing with Problems (Summary) Starting Up (continued) When the previous item is not the cause Press F9 in the Setup Utility ( “Setup Utility”). This will restore the Setup Utility’s settings to their default values (except the password settings). Try removing all peripheral devices. Check a disk error using the following procedure. 1 Display [Local Disk (C:) Properties]. Windows 2000 Select [Local Disk(C:)] with the right button in [My Computer], and select [Properties].
The external display no longer displays properly When you want to display the fonts or icons at a larger size Windows XP An error occurs or the computer freezes while using Dualview When an external display not compatible with the power saving mode is used with the computer, the external display may no longer display properly when the computer enters the condition the power of the display is OFF (for energy conservation purposes). In such cases, turn off the power to the external display.
Dealing with Problems (Summary) Reference Manual The Reference Manual is not displayed Is Acrobat Reader installed? If Acrobat Reader is not installed, run the following*1 in [Start]*2 - [Run] to reinstall the program. When installing the program, do not change the installation destination folder. If the destination folder is changed, the Reference Manual cannot be opened from [Start]*2 menu. *1 : [c:\util\reader\ar505enu.exe] : [c:\util\reader\m\acrore
Reinstalling Software When reinstall procedure is performed, the contents of the hard disk will be erased. Be sure to back up any critical data that is on your hard disk before running the reinstall procedure. The reinstall procedure will return the computer to its original condition. • If you have created partitions for data, the data may be erased or become corrupt as a result of the reinstall procedure.
Reinstalling Software 6 Select the following. [1. Start restoring the operating system.] [1.[Recovery]] The License Agreement screen should appear. 7 Select [1. Yes, I agree to the provisions above and wish to continue!]. This screen should appear. Windows 2000 --------------------------------------------------------------------Select a number --------------------------------------------------------------------1.
15 Perform the setup procedure for Windows by following the instructions on the screen. ( page 13) 16 Run the Setup Utility and change the settings where necessary. You can change the drive letter for the CD drive or hard disk drive by the following steps. Drive letters can only be changed when two or more partitions have been created on the hard disk drive. The name of the C: drive cannot be changed. We recommend that you make these changes before installing applications.
LIMITED USE LICENSE AGREEMENT THE SOFTWARE PROGRAM(S) (“PROGRAMS”) FURNISHED WITH THIS PANASONIC® PRODUCT (“PRODUCT”) ARE LICENSED ONLY TO THE END-USER (“YOU”), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE. Matsushita Electric Industrial Co., Ltd. (“MEI”) has developed or otherwise obtained the Programs and hereby licenses their use to you.
Contrat de licence d’usage limité Le(s) logiciel(s) (les “Logiciels”) fournis avec ce produit Panasonic® (le “Produit”) sont exclusivement concédés en licence à l’utilisateur ultime (“vous”), et ils ne peuvent être utilisés que conformément aux clauses contractuelles cidessous. En utilisant les logiciels, vous vous engagez de manière définitive à respecter les termes, clauses et conditions des présentes. Matsushita Electric Industrial Co., Ltd.
Hard Disk Data Erase Utility This computer is equipped with a utility for completely erasing hard disk data. When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard disk data following the steps below. The hard disk data erase utility erases data using an “overwriting” method, but there is a possibility that due to malfunctions or other operational errors, data may not be completely erased.
B’s Recorder/B’s CLiP “B’s Recorder GOLD5” (hereafter, B’s Recorder) and “B’s CLiP” are CD and DVD recording software applications developed by B.H.A Corporation. Here, explanations are given on general information about B’s Recorder and B’s CLiP, the installation procedure, and how to access the online manual. Refer to the online manual concerning the detailed use of the software application ( page 34).
B’s Recorder/B’s CLiP CAUTION You cannot eject the disc by using the eject button on the drive while is displayed on the taskbar. To eject the disc in this case, move the cursor to the indicator and right-click it to select [Eject]. Do not eject discs in any other way except the one described above. When formatting a disc with B’s CLiP, right-click or to select [Format]. Do not select [My computer]. After formatting the disc, eject it then re-insert before using it.
WinDVD™ WinDVD™ (hereafter, WinDVD) is a software application for DVD playback. Here, you will find explanations and general information on the installation procedure and how to access the online manual. Installing WinDVD CAUTION Close all other software application before running the Setup program for WinDVD for added safety. Log on with the administrator authority. 1 Set the WinDVD CD-ROM in the drive. The WinDVD setup program will run automatically (allow some time for disc recognition).
WinDVD™ About Regions Setting The regions setting can be changed for up to 5 times. After the fifth change is made, it will no longer be possible either to change the setting or to return to the original setting. The DVD-Video has a region code that is fixed according to the region where it is sold. In order to play a DVD-Video, the region code of the player software and of the drive must match that of the DVD-Video. For U.
Names and Functions of Parts The illustrations shown may differ from the actual physical appearances. LCD Function Keys For information on the key combinations available. ( “Key Combinations”). There are dots near function keys to enable you to locate the key’s position by touch.
Names and Functions of Parts External Keyboard/Mouse Port ( LAN “LAN”) USB Ports ( “USB Devices”) External Display Port ( “External Display”) Modem ( “Modem”) IEEE 1394 Interface Connector 1394 ( “IEEE 1394 Devices”) Serial Port Parallel Port ( “Printer”) Ventilation Hole These holes allow heat to exit. CAUTION Do not block or place the computer in a location that may prevent proper ventilation. CAUTION This cover is not to be opened by anyone except authorized service personnel.
Specifications This page provides the specifications for the basic model CF-50AAKHUDM/CF-50BB2HUDM/CF-50AAKHUKM/CF50BB2HUKM/CF-50EAKQUDM/CF-50EAKQUKM/CF-50GB2UUDM/CF-50GB2UUKM. The model number will change depending on the configuration of the unit, such as, CPU speed, memory size, HDD size, Operating System, LCD type, and whether a DVD-ROM drive, a DVD-ROM&CD-R/RW drive or a DVD MULTI drive is included or not.
Specifications Other Specifications Keyboard Slots Interface PC Card Slots RAM Module Slot*1 Parallel Port External Display Port Serial Port Microphone Jack*2 Headphone Jack External Keyboard/Mouse Port Expansion Bus Connector USB Port Modem LAN Wireless LAN IEEE1394 Interface Connector Pointing Device Speaker Utility Programs Sound Floppy Disk Drive Optical Disc DVD-ROM Drive DVD-ROM & CD-R/RW Drive Appendix DVD MULTI Drive 40 87 keys Two Type I or Type II, or one Type III Allowable current 3.
Battery Battery Pack Clock Battery AC adaptor*9 Power Consumption*10 Environment Physical Dimensions (W × H × D) Weight *7 *8 *9 *10 *11 Only a RAM card designed for PC2100 can be added. Use only a monaural condenser microphone. The Product Recovery CD-ROM is required. Read only. In the case of DVD-RAM, only non-cartridge discs or removable cartridge discs can be used. If an unbalanced disc (e.g.
LIMITED WARRANTY For U.S.A. PANASONIC PERSONAL COMPUTER AND PERIPHERALS LIMITED WARRANTY Panasonic Computer Solutions Company (referred to as “Panasonic”) will repair this product (other than software, which is covered by a separate warranty) with new or rebuilt parts, free of charge in the U.S.A. for three (3) years from the date of original purchase in the event of a defect in materials or workmanship.
For Canada PANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTY Coverage – Panasonic Canada Inc. (“PCI”) warrants to you, the first end user customer, this computer product (excluding software media), when purchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the terms set forth below, during the period of warranty coverage specified.
As an ENERGY STAR® Partner, Matsushita Electric Industrial Co., Ltd. has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Outline of the International ENERGY STAR® Office Equipment Program The international ENERGY STAR® Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment.