User Manual

Getting Started

Select the Operating System

Windows 2000 and Windows NT are preinstalled on this computer. After one of them

is selected with the following procedure, only that Operating System can be used.

1 At the screen for the agreement of the selection of the Operating System , select

[Y].

2 With the number keys, select either Windows 2000 or Windows NT.

(The selection of the Operating System is only performed the first time the com-

puter is started up. A change cannot be made after the selection.)

3 At the confirmation message, select [Y]. The Operating System preparation will

start, during which the computer will restart several times.

Windows 2000 Windows NT

Setup Windows

Moving the cursor ( ) or clicking buttons can be performed with the touch pad.

Windows 98

1 Select settings for your region and your keyboard layout, then select [Next].

(for U.S.A.: United States 101)

2 Enter your name and select [Next].

3 Select [Skip] at the [Using Your Modem to Connect].

4 Select [Yes] at the [Cancel Dialing], then select [Next].

The License Agreement will be displayed.

5 After reading the agreement, select [I accept this agreement] or [I do not accept

the agreement], then select [Next].

4 When the screen indicating the completion of the Operating System preparation

is displayed, press any key.

The computer will restart.

CAUTION

Do not touch the keyboard. If you accidentally touch the keyboard and the

cancel confirmation menu is displayed, do not cancel.

6 Select [Finish].

7 Input the correct date, time and time zone and select [Close]. You can also com-

plete these settings at a later time.

If [I do not accept the agreement] is selected, the Windows setup will be

aborted.

NOTE

CAUTION

After confirming that the power indicator has turned on, do not touch the

power switch until Windows setup has started.