User Manual

Operation

1 Open the display

Starting Up/Shutting Down

Starting Up

Turn your computer on

Slide the power switch as shown and hold it for approximately one second until

the power indicator turns on before releasing it.

Latch

CAUTION

After confirming that the power indicator has turned on, avoid the follow-

ing until Windows has completed loading.

• Connecting or disconnecting the AC adaptor.

• Touching the power switch.

• Performing any keyboard, touch pad, touchscreen (or external mouse)

operations.

• Closing the display.

Once the computer is powered off, you must wait at least ten seconds before

powering it on again.

When the CPU temperature rises, the computer may not power on to pre-

vent the CPU from overheating. Should this happen, allow the computer to

cool down then switch the power on again.

If the computer still does not power on, contact Panasonic Technical Support.

Lift up the latch.

Lift open the display.2

Power Switch

Power

Indicator

When an application or file that was previously displayed

appears on your screen,

the standby or hibernation function has been set. (

"Standby/Hibernation

Functions")

you must first enter your password. ( "Security Measures")

Over three incorrect attempts,

If the correct password is input,

Will Start

Upon entering your

password and press-

ing Enter .

Will Not Start*

(Power off)

or no password is entered for about a minute,

If security indicator ( ) is displayed,

* If after three attempts the correct password is not input, or if no pass-

word is entered for about a minute, the computer returns to the condi-

tion just before the attempt was made to start up the computer.