User Manual

23
Troubleshooting
Press Ctrl + Alt + Del and select [Shut Down].
After cutting the power by sliding the power switch for more than four seconds, slide the
power switch to power on and open the application again.
If the program no longer works normally, go to [Start] - [Settings] - [Control Panel] -
[Add/Remove Programs] to delete the program. Then reintsall the program.
Computer hangs
Application Software
Dealing with Problems (Summary)
Is Acrobat Reader installed?
If Acrobat Reader is not installed, run [c:\util\reader\ar500enu.exe] in [Start] - [Run] to
reinstall the program. When installing the program, do not change the installation destina-
tion folder. If the destination folder is changed, the Reference Manual cannot be opened
from the [Start] menu.
Reference Manual
The Reference Manual is
not displayed
After the display destination
of the screen is switched
with Fn + F3 , the dis-
play destination returns to
both the internal LCD and
external display upon op-
eration
Display
Under the condition that the [MS-DOS Prompt]* screen is set to Full Screen, the display
destination returns to both the internal LCD and external display if EXIT is input and the
[MS-DOS Prompt]* screen is closed, or Full Screen is canceled (e.g., Alt + Enter ),
when the display destination of the screen is switched with Fn + F3 .
Press Fn + F3 again.
* Windows 2000 Windows NT : [Command Prompt]
The red indicator lights.
Repeated beeping sound
while the computer is in use.
The red indicator blinks
The orange indicator blinks
The battery level is low. Save your data and power off your computer.
After connecting the AC adapter or replacing the battery pack with a fully charged one, turn
your computer on.
The battery pack or recharging function may be defective. Quickly remove the battery
pack and disconnect the AC adapter, then connect them again.
If the problem persists, contact Panasonic Technical Support.
Unable to charge because of an improper temperature range. ( page 6)
Battery Indicator
Unable to shut down Win-
dows
Shutting down
If a USB device is connected, try removing it.