Product Info

ManualsBrandsPanasonic Corporation of North America ManualsElectronicsCell/PCS GSM/EDGE/WCDMA/CDMA and 700MHz LTE Modem

Disabling/Enabling Wireless Communication

There are several ways of disabling and enabling wireless communication.

Using airplane mode

Wireless switch utility

Setting [Wireless Configuration] in the [Advanced] menu of the Setup Utility

Setting in the Wireless Connection Disable Utility

Settings in the Network and Sharing Center ( Using the Wireless LAN Function)

- For further information about Wireless LAN.

- For further information about Bluetooth.

- For further information about Wireless WAN.

The wireless communication can be enabled or disabled by connecting or

disconnecting the LAN cable. ( Wireless Connection Disable Utility)

Using airplane mode

(For wireless LAN, wireless WAN and Bluetooth)

1. Display "Charm" and touch - [Change PC Settings] - [Wireless].

2. Set [Airplane mode] to [Off], and then;

{ set [Wi-Fi] in "Wireless device" to [On] (for wireless LAN).

{ set [Mobile broadband] in "Wireless device" to [On] (for wireless WAN).

{ set [Bluetooth] in "Wireless device" to [On] (for Bluetooth).

NOTE

1/4 ページDisabling/Enabling Wireless Communication

2012/12/14file://\\Horsay-file1\社内書類\勤務簿\制作グループ\制作１_加藤\制作１チー...

Summary of content (14 pages)

PAGE 1
Disabling/Enabling Wireless Communication 1/4 ページ Disabling/Enabling Wireless Communication There are several ways of disabling and enabling wireless communication.
PAGE 2
Disabling/Enabling Wireless Communication 2/4 ページ To check the wireless communication status 1. Touch on the notification area and place the cursor over the Wireless Switch Utility icon ( or ). A tooltip appears. The Wireless Switch Utility icon The icon appears when touch devices. on the notification area. It shows the status of wireless z : Indicates that the wireless devices are enabled. z : Indicates that the wireless devices are off.
PAGE 3
Disabling/Enabling Wireless Communication 3/4 ページ connected to your computer. You need to install the Wireless Connection Disable Utility to use this function. Installing the utility 1. Log on to Windows as an administrator. 2. Touch (Start), input "c:\util\wdisable\setup.exe" in [Search programs and files], and press «Enter». 3. Follow the on-screen instructions to install the Wireless Connection Disable Utility.
PAGE 4
Disabling/Enabling Wireless Communication 4/4 ページ Touching the menu item causes the following utility action. z Monitoring LAN Cable: ON Enables the Wireless Connection Disable Utility to monitor the LAN port and disable wireless connection when a LAN cable is connected. z Monitoring LAN Cable: OFF Disables the Wireless Connection Disable Utility, and enables wireless connection regardless of whether a LAN cable is connected or not.
PAGE 5
Wireless LAN 1/3 ページ Wireless LAN CAUTION - Do not use wireless LAN on airplanes, in hospitals, or in other locations where wireless LAN signals may affect devices. Follow the instructions of airline companies and hospitals. If you use the computer in these locations, turn off the wireless LAN. - To avoid unauthorized access to the computer through wireless LAN We recommend you to make security settings such as encryption before using wireless LAN.
PAGE 6
Wireless LAN 2/3 ページ Turning on/off the wireless LAN communication 1. To enable the wireless communication ( Communication). Disabling/Enabling Wireless NOTE You can use the following procedure instead of turning on wireless LAN in the Wireless Switch Utility. 1. Touch (Start) - [Control Panel] - [Adjust commonly used mobility settings]. 2. Touch [Turn wireless on] in [Wireless Network]. z When [Turn wireless off] is displayed, the wireless network is already on.
PAGE 7
Wireless LAN 3/3 ページ If you do not perform the procedure below, you may not be able to access the wireless LAN access point automatically or the wireless LAN access point may not be displayed on the [Connect to a network] screen. 1. Touch or / , or on the notification area, touch [Open Network and Sharing Center] - [Set up a new connection or network] - [Manually connect to a wireless network] and touch [Next]. 2.
PAGE 8
Bluetooth 1/2 ページ Bluetooth You can access internet and other Bluetooth devices without connecting cables. NOTE - Communication is established through the Bluetooth antenna (A). Do not block the antenna area with your hand or body. - To use Bluetooth, set [Bluetooth] of [Wireless Configuration] to [Enabled] (default) in the [Advanced] menu of the Setup Utility. - The transmission rate will be lower when a microwave oven is used near by.
PAGE 9
Bluetooth 2/2 ページ To check the Bluetooth communication status 1. Display "Charm" and touch 1. Touch - [Change PC Settings] - [Wireless]. on the notification area and place the cursor over the Wireless Switch Utility icon ( or ). A tooltip appears. To access the online manual 1. Display [All apps], and then touch [Bluetooth User Guide] under "Bluetooth". To display [All apps], proceed as follows on the Start screen. 1. Flick from bottom side to inside of the screen. 2.
PAGE 10
Wireless WAN 1/5 ページ Wireless WAN This computer is equipped with the Wireless WAN enabling you to communicate using radio frequencies. Inserting/Removing a SIM Card Before using the Wireless WAN, set a SIM card to the SIM card slot. CAUTION - Be sure to turn off the computer before inserting or removing the SIM card. Perform the following steps to turn off the computer. 1. Display "Charm" and touch - [Change PC settings] - [General]. 2.
PAGE 11
Wireless WAN 2/5 ページ - If the computer repeatedly enters sleep, connection using Wireless WAN Manager may become impossible. In this case, restart the computer. - If "Device driver software was not installed correctly." ( or a similar message ) appears when starting the computer or resuming from sleep or hibernation. z z When communication works normally, Wireless WAN is operating correctly. If communication fails, the device may not be recognized correctly. In this case, restart the computer.
PAGE 12
Wireless WAN 3/5 ページ 2. Disconnect the AC adaptor, remove the battery pack. 3. Remove the screws (E) and the SIM card slot cover (F). 4. Push the card. It will come out of the slot a little bit. 5. Pull the card all the way out. 6. Close the SIM card slot cover. 7. Insert the battery pack and connect the AC adaptor. Setting ISP information 82 file://\\Horsay-file1\社内書類\勤務簿\制作グループ\制作１_加藤\制作１チー...
PAGE 13
Wireless WAN 4/5 ページ For some internet service providers, they may be specified the "PAP" or "CHAP" as authentication protocol. In this case, perform the following steps. Preparation - Insert a SIM card. - Turn on the Wireless function.( Using airplane mode). - Perform the following procedure within the communication area . 1. Check IMSI and SIM ICC ID. 1. Touch on the notification area on the desktop screen. 2. Long touch the name of your mobile broadband network, and touch [View connection properties].
PAGE 14
Wireless WAN 5/5 ページ USERNAME PASSWORD CHAP Change the settings. SubscriberID: Replace the "IMSI". (Step 1) SimIccID: Replace "SIM ICC ID". (Step 1) AccessString: Replace "APN". (Step 2) UserName: Replace "UserName". (Step 2) When a UserName is not specified, delete this line. Password: Replace "Password". (Step 2) When a Password is not specified, delete this line.