User's Manual

LKM-A111-BC / LKM-A111-BD / LKM-A121-BC / LKM-A121-BD 27
LED Indication for Drive Status
The LED indicators are defined as follows
GREEN, ALL lit
(0.5 sec.)
then
YELLOW blinks
from left LED to
right LED
repeatedly.
(during Diag for 2
to 3 sec.)
ALL GREEN,
blinking
GREEN, ALL
lit only while
Eject Button
is pressing
UMBER, blinking
UMBER
YELLOW, blinking
YELLOW
GREEN, blinking
GREEN
OFF
Tape Access
in Progress
(Write)
Tape Access
in Progress
(Search)
Tape Loaded
(Write Protected)
Tape Access
in Progress
(Read)
Tape Loaded
(Writable)
No Tape
Drive Error
Occured
Drive Error
Occured
No Drive Error
Occured
Error on Cleaning
Cleaning Request
Cleaning is Not Completed
No Cleaning Request
Occured
LED TAPE MOTION DRIVE ERROR TAPE ERROR CLEANING REQUEST
A Moment of Power ON and Reset
Firmware Update
Eject Inhibit
Media Error
Occured
Media Error
Occured
Media Warning
No Media Error
Occured
Operation ( for Model LKM-A111-BC / LKM-A111-BD / LKM-A121-BC / LKM-A121-BD )
Power LED [GREEN] : lit = Power ON, blinking = FAN is malfunction