User Manual

CLASSIFICATION
PRODUCT SPECIFICATION
No.
DS-13xx-2400-102
REV.
4.8
SUBJECT
CLASS 1 or 2 BLUETOOTH MODULE
PAGE
56 of 60
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter Ordering Information
DATE
23.09.2015
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
34.1.5 Approved Antenna List (PAN1315, PAN1325)
Note: We are able to qualify your antenna and will add to this list as that process is completed.
Item
Part Number
Manufacturer
Frequency Band
Type
Gain (dBi)
1
2450AT43B100
Johanson Technologies
2.4GHz
Chip-Antenna
+1.3
2
LDA212G3110K
Murata
2.4GHz
Chip-Antenna
+0.9
3
4788930245
Würth Elektronik
2.4GHz
Chip-Antenna
+0.5
34.1.6 Approved Antenna List (PAN1316, PAN1317, PAN1326, PAN1327)
Note: We are able to qualify your antenna and will add to this list as that process is completed.
Item
Part Number
Manufacturer
Frequency Band
Type
Gain (dBi)
1
LDA212G3110K
Murata
2.4GHz
Chip-Antenna
+0.9
34.1.7 RF Exposure PAN13xx
To comply with FCC RF Exposure requirements, the Original Equipment Manufacturer
(OEM) must ensure that the approved antenna in the previous tables must be installed.
The preceding statement must be included as a CAUTION statement in manuals for
products operating with the approved antennas in the previous table to alert users on
FCC RF Exposure compliance.
Any notification to the end user of installation or removal instructions about the
integrated radio module is not allowed.
The radiated output power of PAN13xx with mounted ceramic antenna
(FCC ID: T7V1315 or T7V1316) is far below the FCC radio frequency exposure limits.
Nevertheless, the PAN13xx shall be used in such a manner that the potential for human
contact during normal operation is minimized.
End users may not be provided with the module installation instructions. OEM
integrators and end users must be provided with transmitter operating conditions for
satisfying RF exposure compliance.