User Manual

CLASSIFICATION
PRODUCT SPECIFICATION
No.
DS-13xx-2400-102
REV.
4.8
SUBJECT
CLASS 1 or 2 BLUETOOTH MODULE
PAGE
6 of 60
CUSTOMER’S CODE
PAN13XX Core Specification
PANASONIC’S CODE
See Chapter Ordering Information
DATE
23.09.2015
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
2 KEY FEATURES
 Bluetooth specification v2.1 + EDR (Enhanced Data Rate)
 Surface mount type 6.5(9.5 w. Ant.) x 9.0 x 1.8 mm³
 Up to 10 dBm Tx power with transmit power control
 High sensitivity (-93 dBm typ.)
 Texas Instrument’s CC256X BlueLink 7.0 inside
 Fast Connection Setup
 Extended SCO Link
 Supports convenient direct connection to battery (2.2-4.8 V),
or connect to DC/DC (1.7-1.98 V) for improved power efficiency
 Internal crystal oscillator (26MHz)
 Fully shielded for immunity
 Full Bluetooth data rate up to 2,178kbps asymmetric
 Support for Bluetooth power saving modes (Sniff, Hold)
 Support for very low-power modes (deep sleep and power down)
 Optional support for ultra-low-power mode. Standby with Battery-Backup
 PCM Interface Master / Slave supporting 13 or 16 bit linear, 8 bit µ-law or A-law
Codecs and CVSD transcoders on up to 3 SCO channels
 Full 8- to 128-bit encryption
 UART, I²C and PCM Interface
 IO operating voltage = 1.8 V nominal
 Bluetooth profiles such as SPP, A2DP and others are available. Refer to
Panasonic’s RF module website for a listing of the most current releases.
 Manufactured in conformance with RoHS