User Manual
Table Of Contents
- 1. KEY FEATURES
- 2. APPLICATIONS FOR THE MODULE
- 3. DESCRIPTION FOR THE MODULE
- 4. SCOPE OF THIS DOCUMENT
- 5. HISTORY FOR THIS DOCUMENT
- 6. TERMINAL LAYOUT
- 7. BLOCK DIAGRAM
- 8. KEY PARTS LIST
- 9. TEST CONDITIONS
- 10. ABSOLUTE MAXIMUM RATINGS
- 11. OPERATING CONDITIONS
- 12. DC ELECTRICAL CHARACERISTICS
- 13. A/D CONVERTER CHARACTERISTICS
- 14. AC ELECTRICAL CHARACTERISTICS
- 15. SOLDERING TEMPERATURE - TIME PROFILE (FOR REFLOW SOLDERING)
- 16. MODULE DIMENSIONS
- 17. FOOTPRINT OF THE MODULE
- 18. LASER MARKING
- 19. MECHANICAL REQUIREMENTS
- 20. RECOMMENDED LAND PATTERN
- 21. RELIABILITY TESTS
- 22. CAUTIONS
- 23. PACKAGING
- 24. ORDERING INFORMATION
- 25. ROHS DECLARATION
- 26. DATA SHEET STATUS
- 27. REGULATORY INFORMATION
- 28. INDUSTRY CANADA CERTIFICATION
- 29. EUROPEAN R&TTE DECLARATION OF CONFORMITY
- 30. RELATED DOCUMENTS
- 31. GENERAL INFORMATION
- 32. LIFE SUPPORT POLICY
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-PAN2580-102
REV.
1.0
SUBJECT 802.15.4-MODEM PAGE 22 of 31
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
DATE 07.09.2011
PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.panasonic.de
23. PACKAGING
23.1. TAPE DIMENSION
Measured from centreline of sprocket hole
to centreline of pocket.
Cumulative tolerance of 10 sprocket
holes is ± 0.20 .
Measured from centreline of sprocket
hole to centreline of pocket.
(I)
(II)
(III)
(IV)
Other material available.
ALL DIMENSIONS IN MILLIMETRES UNLESSOTHERWISE STATED.
W
F
+/- 0.15
+/- 0.10
+/- 0.30
20.20
40.40
44.00
+/- 0.20
3.80Ko
Bo 30.20
+/- 0.10
+/- 0.10
28.00P1
Ao
+/- 0.10
19.40
2.95
+/- 0.10
K1
Estimated max. length : 50
meter/22B6 reel
Forming format : Flatbed - 8
So
So W
F (III)
1.75
±
0.10
E1
2.00
±
0.15 (I)
P2
4.00
±
0.10 (II)
Po
Ø1.55
±
0.05
Do
Ø2.00
min.
D1
Typ. R
0.30
P1 Ao
Y
Y
0.35
±
0.05
T
A
K1
Ko
Bo
SECTIONY-Y
SCALE 1.45 : 1
0.20
±
0.05
R0.75
DETAIL A
SCALE 6 : 1
23.2. PACKING IN TAPE
trailer (empty)
1 x circumference /hub
(min 160mm)
leader (empty)
minimum 10 pitch
Top cover tape more
than 1 x circumference
plus 100mm to avoid
fixing of tape end on
sealed modules.
component
packed area
standard
500pcs
Empty spaces in component packed area shall be less than two per reel and those
spaces shall not be consecutive.
Top cover tape shall not be found on reel holes and shall not stick out from reel.