User Manual
Table Of Contents
- 1. KEY FEATURES
- 2. APPLICATIONS FOR THE MODULE
- 3. DESCRIPTION FOR THE MODULE
- 4. SCOPE OF THIS DOCUMENT
- 5. HISTORY FOR THIS DOCUMENT
- 6. TERMINAL LAYOUT
- 7. BLOCK DIAGRAM
- 8. KEY PARTS LIST
- 9. TEST CONDITIONS
- 10. ABSOLUTE MAXIMUM RATINGS
- 11. OPERATING CONDITIONS
- 12. DC ELECTRICAL CHARACERISTICS
- 13. A/D CONVERTER CHARACTERISTICS
- 14. AC ELECTRICAL CHARACTERISTICS
- 15. SOLDERING TEMPERATURE - TIME PROFILE (FOR REFLOW SOLDERING)
- 16. MODULE DIMENSIONS
- 17. FOOTPRINT OF THE MODULE
- 18. LASER MARKING
- 19. MECHANICAL REQUIREMENTS
- 20. RECOMMENDED LAND PATTERN
- 21. RELIABILITY TESTS
- 22. CAUTIONS
- 23. PACKAGING
- 24. ORDERING INFORMATION
- 25. ROHS DECLARATION
- 26. DATA SHEET STATUS
- 27. REGULATORY INFORMATION
- 28. INDUSTRY CANADA CERTIFICATION
- 29. EUROPEAN R&TTE DECLARATION OF CONFORMITY
- 30. RELATED DOCUMENTS
- 31. GENERAL INFORMATION
- 32. LIFE SUPPORT POLICY
CLASSIFICATION PRODUCT SPECIFICATION
No.
DS-PAN2580-102
REV.
1.0
SUBJECT 802.15.4-MODEM PAGE 30 of 31
CUSTOMER’S CODE
PAN2580
PANASONIC’S CODE
ENW59625xxxF
DATE 07.09.2011
PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.panasonic.de
30. RELATED DOCUMENTS
For an update, please search in the suitable homepage.
[1] IEEE Standard 802.15.4 –2003 Wireless Medium Access Control (MAC) and Physical
Layer (PHY) Specifications for Low-Rate Wireless Personal Area Networks (LR-
WPANs)
[2] Technical Datasheet Si1000/1/2/3/4/5 Rev. 1.0 9/10
You can download the latest datasheet from the SiLabs homepage here
.
[3] Manual to the Evaluation Kit from Synapse, which fits to module hardware from
Panasonic [Downloads: SNAP® Reference Manual Updated 10/2/2008
; SNAP
Hardware Technical Manual Updated 10/2/2008
]
Each new release from Synapse, will be posted here. Be sure to be registered free
under
http://forums.synapse-wireless.com.
31. GENERAL INFORMATION
© Panasonic Electronic Devices Europe GmbH 2009.
All rights reserved.
This product description does not claim to be complete and free of mistakes.
Please contact the related product manager with any errata inquries.
If we deliver samples to the customer, these samples have the status Engineering
Samples. This means, the design of this product is not yet completed. Engineering
Samples may be partially or fully functional, and there may be differences published in the
Data Sheet.
Engineering Samples are not qualified and are not to be used for reliability testing or series
production.
Disclaimer:
Customer acknowledges that samples may deviate from the Data Sheet and may bear
defects due to their status of development and the lack of qualification mentioned above.
Panasonic Electronic Devices Europe GmbH disclaims any liability or product warranty for
Engineering Samples. In particular, Panasonic Electronic Devices Europe GmbH disclaims
liability for damages caused by
• the use of the Engineering Sample other than for Evaluation Purposes, particularly the
installation or integration in an other product to be sold by Customer,
• deviation or lapse in function of Engineering Sample,
• improper use of Engineering Samples.
Panasonic Electronic Devices Europe GmbH disclaimes any liability for consequential and
incidental damages. In case of any questions, please contact your local sales partner or
the related product manager.