User Manual

CLASSIFICATION
PRODUCT SPECIFICATION
No.
DS-9320-2400-102
REV.
1.1
SUBJECT
WI-FI IEEE 802.11 BGN FULL EMBEDDED MODULE
PAGE
15 of 43
CUSTOMER’S CODE
PAN9320 / PAN9310
PANASONIC’S CODE
ENW49A01x3EF & ENW49A02x3EF
DATE
14.03.2016
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
16. KEY PARTS LIST
Part Name
Material
P.W.Board
Glass cloth epoxy resin with gold plating
Casing
Material: C7521, thickness 0.30mm
IC (WLAN SoC)
88W8782 (Marvell
®
, www.marvell.com)
IC (Microcontroller Unit)
88MC200 (Marvell
®
, www.marvell.com)
IC (QSPI flash memory)
MX25L1633E (Macronix
®
, http://www.macronix.com)
17. TEST CONDITIONS
Measurements shall be made under operating free-air temperature range unless otherwise specified.
Temperature 25 ± 10°C
Humidity 40 to 85%RH
Supply Voltage 3.3V
18. GENERAL REQUIREMENTS AND OPERATION
All specifications are over temperature and process, unless indicated otherwise.
18.1. ABSOLUTE MAXIMUM RATINGS
The maximum ratings may not be exceeded under any circumstances, not even momentarily and
individually, as permanent damage to the module will result.
Symbol
Parameter
Condition
Min.
Typ.
Max.
Units
T
STOR
Storage temperature
-40
+85
°C
V
ESD
ESD robustness
All pads, according to human-body model, JEDEC
STD 22, method A114
1000
V
According to charged-device model, JEDEC STD 22,
method C101
500
V
P
RF
RF input level
+20
dBm
V
DDMAX
Maximum voltage
Maximum power supply voltage from any pin with
respect to V
SS
(GND)
-0.3
3.6
V
V
DIG
Voltage on any digital pins
GPIOs, RESETn, UART, QSPI, Coex I/F
-0.3
V
DDMAX
V
18.2. RECOMMENDED OPERATING CONDITIONS
The maximum ratings may not be exceeded under any circumstances, not even momentarily and
individually, as permanent damage to the module will result.
Symbol
Parameter
Condition
Min.
Typ.
Max.
Units
T
A
Ambient operating
temperature range
Extended grade
-30
+70
°C
V
DD
3V3 Supply voltage
6
Voltage on pins 7, 8 (3.3V)
I/O supply voltage internally connected to V
DD
/ V
CC
3.0
3.3
3.6
V
6
The supply current must be limited to max. 1A