User Manual

CLASSIFICATION
PRODUCT SPECIFICATION
No.
DS-9320-2400-102
REV.
1.1
SUBJECT
WI-FI IEEE 802.11 BGN FULL EMBEDDED MODULE
PAGE
17 of 43
CUSTOMER’S CODE
PAN9320 / PAN9310
PANASONIC’S CODE
ENW49A01x3EF & ENW49A02x3EF
DATE
14.03.2016
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
18.6. POWER UP SEQUENCE
When the power is turned on, set reset signal to low (RESETn = low). After the V
DD
is stable, release
the reset (RESETn = high).
18.7. FIRMWARE RELATED TIMING
Symbol
Parameter
Min.
Typ.
Max.
Units
T
MCU READY
Time period from Power up or Reset until MCU READY pin is active
4
5
sec
T
WAKE UP
Time period need to set pin active to wake-up from shut-off mode
(afterwards firmware is booting)
100
ms
T
FACTORY RESET
Time period need to set pin active to release factory reset
(afterwards firmware is booting)
8
10
sec
T
INFRA ASSO
Time period in Infrastructure mode from WLAN association request until
association with selected Access-Point’s SSID
4
sec
T
DE-ASSO SCAN
Time period between de-association from AP until next scan is released
60
sec
T
IP DHCP
Time period from IP DHCP request until IP assignment
90
sec