User Manual

CLASSIFICATION
PRODUCT SPECIFICATION
No.
DS-9320-2400-102
REV.
1.1
SUBJECT
WI-FI IEEE 802.11 BGN FULL EMBEDDED MODULE
PAGE
42 of 43
CUSTOMER’S CODE
PAN9320 / PAN9310
PANASONIC’S CODE
ENW49A01x3EF & ENW49A02x3EF
DATE
14.03.2016
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
31.2.2. Labeling Requirements
The Original Equipment Manufacturer (OEM) must ensure that IC labelling requirements are met.
This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate
Panasonic IC identifier for this product as well as the IC Notice above.
The IC identifiers are: IC: 216Q-9320 (for M/N: ENW49A01x3EF
(16)
)
IC: 216Q-9320 (for M/N: ENW49A02x3EF
(16)
)
This IC identifier is valid for all PAN9320, for details, see the Chapter 28 Ordering Information. In
any case the end product must be labelled exterior with:
"Contains IC: 216Q-9320”
Les fabricants d’équipements (OEM) doivent s’assurer que les obligations d’étiquetage du produit
final sont remplies. Ces obligations incluent une étiquette clairement visible à l’extérieur de
l’emballage externe, comportant l’identifiant IC du module Panasonic inclus, ainsi que la notification
ci-dessus.
Les identifiants IC sont: IC: 216Q-9320 (pour M/N: ENW49A01x3EF
(16)
)
IC: 216Q-9320 (pour M/N: ENW49A02x3EF
(16)
)
Ces identifiants sont valides pour tous les PAN9320 (28 Ordering Information). Dans tous les cas
les produits finaux doivent indiquer sur leur emballage externe une des mentions suivantes:
"Contient IC: 216Q-9320”
31.3. EUROPEAN R&TTE DECLARATION OF CONFORMITY
All modules described in this data sheet comply to the standards according R&TTE article:
3.1a Safety/Health: EN60950-1:2006+A11:2009+A1:2010+A12:2011+AC:2011+A2:2013
EN62311:2008
3.1b EMC: EN 301 489-1 V1.8.1:2008-04
EN 301 489-17 V2.2.1:2012-09
3.2 Radio: EN 300 328 V1.8.1:2012-06
As a result of the conformity assessment procedure described in Annex III of the Directive
1999/5/EC, the end-customer equipment should be labelled as follows:
The end-customer has to assure that the device has a distance of more than 20cm from the human
body under all circumstances.
The end-customer equipment must meet the actual Safety/Health requirements according R&TTE.
PAN9320 and their model versions in the specified reference design can be used in the following
countries: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany,
Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Netherland, the United Kingdom, Switzerland, and Norway.