User Manual

CLASSIFICATION
PRODUCT SPECIFICATION
No.
DS-9320-2400-102
REV.
1.1
SUBJECT
WI-FI IEEE 802.11 BGN FULL EMBEDDED MODULE
PAGE
6 of 43
CUSTOMER’S CODE
PAN9320 / PAN9310
PANASONIC’S CODE
ENW49A01x3EF & ENW49A02x3EF
DATE
14.03.2016
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
www.pideu.panasonic.de
5. KEY FEATURES
 Surface Mount Type (SMT) measured 29.0 x 13.5 x 2.66 [mm]³
 Wireless Local Area Network (WLAN) module with integrated MCU and Radio
 Operating in the 2.4GHz ISM band
 Supports the following IEEE 802.11 standards:
 IEEE 802.11b/g payload data rates
 IEEE 802.11n high throughput data rates
 IEEE 802.11i security: WEP and WPA/WPA2 (TKIP, AES-CCMP)
 IEEE 802.11e Quality of Service (QoS)
 TX power up to +18dBm (for IEEE 802.11b)
 Outstanding RX sensitivity
 -98dBm (IEEE 802.11b DSSS 1Mbps)
 -75dBm (IEEE 802.11g OFDM 54Mbps)
 -73dBm (IEEE 802.11n MCS7 HT20 65Mbps)
 -70dBm (IEEE 802.11n MCS7 HT40 135Mbps)
 Marvell® 88W8782 WLAN System-on-Chip (SoC) and 88MC200 (MCU) inside
 High performance low power CPU core
 Coexistence interface for external co-located 2.4GHz radios (e.g. Bluetooth)
 Internal crystal oscillators for Radio (40MHz) and MCU (32MHz)
 Integrated memory flash for customer web contents and configuration file (1MByte)
 Memory extension with an external QSPI flash (2MByte) is optional
 Two UART interfaces (command and binary data)
 Integrated shielding to resist EMI
 Manufactured in conformance with RoHS
 Available with either integrated antenna (PAN9320) or dedicated RF pad for external antennas
(PAN9310)
6. APPLICATIONS FOR THE PAN9320
All Embedded Wireless Applications
 White Good
 Printer
 Home Automation
 Smart Meters
 Internet of Things
 Media Player
 Fitness Equipment
 Sensors
 Lighting Control
 POS Terminal
 M2M Communication
 Patient Monitors